In a message of  James Mckenzie (1:309/63) writes:
 RC> USR modems do not support the Wn command.  USR modems _always_ return
 RC> DCE speed, never DTE speed.
 JM> Thanks for the correction.  I would like to know if there is a method 
 JM> with USR modems to return the connect speed, type of compression/error 
 JM> correction.  I should know the DCE speed even under Windows95 as that is 
 JM> set under the connect properties for the modem.
Returned information from the connect is controlled by Qn, Vn and &An 
settings in the modem.  As for Win '95, what you set in modem properties is 
the DTE speed, not the DCE speed.
   Gene Lowry
 
--- msged 2.07
---------------