Robin Iwamoto wrote in a message to All:
 RI> Hello All!
 RI> I have 4 Couriers, all running 09/20/96 (Supervisor Date) code. 
 RI> Only one of the Couriers qualified for the free x2 upgrade.
 RI> Shortly after x2 was released I flashed that one Courier with the
 RI> 02/25/97 (?) code, obtained the x2-enable key and completed the
 RI> upgrade online thru USR's BBS.  However, due to problems I had with
 RI> other mailers at the time (which may or may not have been related
 RI> to that code), I flashed it back to 09/20/96 and have been running
 RI> that way ever since.
I had the same problem and had to do the same thing...and 3com support was no 
help.
 RI> Question: to upgrade that Courier now to V.90; must I first flash
 RI> to 02/25/97 or later, enable x2 again thru the 3Com BBS and =then=
 RI> flash up to V.90?  Or can I flash straight to V.90 (secondary
 RI> question being -- must I then also enable x2/V.90 thru the 3Com
 RI> BBS)?
funny thing is after flashing back to the older code the ati7 still showed 
x2, so having been enabled must have left that part in. I flashed the new 
code with no problems so far.
>==<
>==<
--- timEd 1.10+
---------------