Lawrence R. Mintz wrote in a message to Bob Wingender:
 LRM> Well, in a DOS session under OS/2, using SIO.SYS rather than IBM's
 LRM> own COM.SYS, I get the following:
 LRM> Current Settings:
 LRM>   COM Port   : 2
 LRM>   IRQ Number : 3
 LRM>   Base Addr  : 0x2f8
 LRM>   Bit Rate   : 115200 bps
 LRM> DOWNLOAD USING THESE SETTINGS? (Y/N) : Y
 LRM>   Looking for modem...
 LRM>   ERROR (15) Handshake failed
 LRM> And then it spews out the text about how you might have a 25 MHz
 LRM> model or be running a DOS session under Windows, etc.
Did you do a SU 2 LOCK 0?  If your SIO is not registered, this won't work, 
and you'll have to reboot without a locked port.
                                   - Bob
Internet  : bob@juge.com
Telnet, Vmodem, WWW or FTP to juge.com
--- timEd/2 1.10+
---------------