BW> U. S. Robotics Modem Software Downloader    Version 1.8
 BW> Copyright (c) 1994,95,96,97,98 by USRobotics Inc. All
 BW> rights reserved
 BW> Validation sequence started...
 BW> Validation sequence passed!
 BW> Current settings :
 BW>   COM Port    : 1
 BW>   IRQ Number  : 4
 BW>   Base Addr   : 0x3F8
 BW>   Bit Rate    : 57600 bps
 BW> DOWNLOAD USING THESE SETTINGS? (Y/N) :Y
 BW> Looking for modem...
 BW>   Erasing *FLASH* memory...
 BW>   Transmitting Loader...
 BW>   Modem Calculating CRC...
 BW>   Waiting for modem to reset...
 BW>   Looking for modem...
 BW>   Erasing *FLASH* memory...
 BW>   Transmitting Modem Code...
 BW>   |||||||||||||||||||||||||||||||||||||||
 BW>   Modem Calculating CRC...
 BW>   WAITING FOR MODEM TO RESET
 BW>   Now running configuration file
 BW> AT
 BW> OK
 BW> AT&F1
 BW> OK
 BW> ATS7=55
 BW> OK
 BW> ATS11=50
 BW> OK
 BW> ATS10=14
 BW> OK
 BW> ATS58=0
 BW> OK
 BW> ATS59=0
 BW> OK
 BW> ATS60=0
 BW> OK
 BW> ATS61=0
 BW> OK
 BW> ATS69=0
 BW> OK
 BW> ATS70=0
 BW> OK
 BW> AT#CID=0
 BW> OK
 BW> AT&U0
 BW> OK
 BW> AT&N0
 BW> OK
 BW> ATT
 BW> OK
 BW> AT&W
 BW> OK
 BW>   Modem reports successful download!
Well, in a DOS session under OS/2, using SIO.SYS rather than IBM's own 
COM.SYS, I get the following:
Current Settings:
  COM Port   : 2
  IRQ Number : 3
  Base Addr  : 0x2f8
  Bit Rate   : 115200 bps
DOWNLOAD USING THESE SETTINGS? (Y/N) : Y
  Looking for modem...
  ERROR (15) Handshake failed
And then it spews out the text about how you might have a 25 MHz model or be 
running a DOS session under Windows, etc.
Larry
--- RA/Pro 2.50
---------------