[ Quoting Sylvain Lauzon to All about 'Stats' ]
 SL> The 1st info was with a sfm to suprasonic, 2nd one was to a usr
 SL> courrier. Using the -26 rom
 SL> at%q1
 SL> EQM                  = 47
 SL> RX level             = -21dBm
 SL> TX level             = -11dBm
 SL> TX data rate         = 33600  min = 33600  max = 33600
 SL> RX data rate         = 33600  min = 33600  max = 33600
 SL> Far echo delay       = 1ms
 SL> Far echo level       = -50dBm
 SL> Pre-emphasis filter  = 3
 SL> Pre-Coding           = TX 1 RX 1
 SL> Shaping              = TX 1 RX 1
 SL> Non-linear encoding  = TX 1 RX 1
 SL> Trellis mapping      = 16-4D
 SL> SNR                  = 40dB
 SL> Normalized band width= 150Hz-3825Hz
 SL> Symbol rate          = 3429
 SL> at%q1
 SL> EQM                  = 41
 SL> RX level             = -24dBm
 SL> TX level             = -10dBm
 SL> TX data rate         = 28800  min = 28800  max = 28800
 SL> RX data rate         = 33600  min = 33600  max = 33600
 SL> Far echo delay       = 1ms
 SL> Far echo level       = -50dBm
 SL> Pre-emphasis filter  = 8
 SL> Pre-Coding           = TX 1 RX 1
 SL> Shaping              = TX 1 RX 1
 SL> Non-linear encoding  = TX 1 RX 1
 SL> Trellis mapping      = 64-4D
 SL> SNR                  = 38dB
 SL> Normalized band width= 150Hz-3825Hz
 SL> Symbol rate          = 3429
 SL> The Eye Quality was better to the usr but for some reason TX is
 SL> limited to that speed.
Glad to see someone somewhere has good phone lines.  I can't
get anything over a 26400 TX/RX to another sfm.  To USR's I get
21600-24000.  Thank's US West (or should it be Waste).
.\ran 
Internet: aspence@imm.com
---
---------------