20 Jul 96 , John Veldthuis did fondle the keyboard and wrote to me!:
 Yowser & greets John!,

 RVR>> To attempt a TCP ethernet connection to Win95 based PC's (or Wolverine
 RVR>> based Win3.11 pc's or I also suspect OS/2 Warp connect TCP V3 or later
 RVR>> pc's) using AmiTCP and QuickNet.device as your Sana II driver, then
 RVR>> you
 RVR>> must ensure you have the latest QuickNet.device.

 RVR>> This device will have a version number later than 2.47 and be dated
 RVR>> 12/7/96 or later. Any earlier versions of this device simply will not
 RVR>> work!

 JV> Well I have to say that I have it working perfectly here at home.
 JV> I can see the Amiga drives from the PC using Samba. I can read/write to
 JV> them. I can use FTP/WWW/EMAIL both from and to the PC to my Amiga's. I
 JV> can access the Laserjet printer that is on my PC from my Amiga. I can
 JV> also access the drives (the ones that have sharing turned on) from my
 JV> PC.

Excellent! Can you email Norman Pakes (normanp{at}mpx.com.au) and tell him how
you did it. He is the author of QuickNet.device (SanaII driver for the
Quicknet card) and told me over the phone and via email that he can't get
it to talk to Win95's TCP implementation. While you're at it can you help
me out? I can get transfers from the PC to the Amiga fine, it's just the
other way that isn't working.....

Perhaps some examples of your Samba config - I also grabbed this but didn't
really proceed with setting it up because a) it got me confused, and b) it
was at the same time Norman told me about the flaw in Quicknet.device.

Thanks for any help you may like to send my way...

 JV> ---
 JV> Internet prefered address johnv{at}voyager.co.nz     
 JV> Internet secondary        johnv{at}tower.actrix.gen.nz

You can email if you like: ricta{at}ion.com.au                                 
                           ricta{at}ameret.ion.com.au                        
                       or  admin{at}ameret.ion.com.au                        

Thanks John! :)

Cheers,       __
             /_/                 
            / \*icta*...

--- Spot 1.3a #506