Charles Gaefke @ 1:129/230 wrote on 04-24-98 02:00 about *two floppy drives*
 CG>     Only problem is I can't access it under OS/2.  If I have it
 CG> connected as B: with my 3.5" as A:, when I try to access it, the
 CG> light for BOTH drives comes on.  
Sounds like the DS settings (jumpers) on the drive are set incorrectly; they 
need to be set sperately, eg, DS0 and DS1 or DS1 and DS2 (depends on the 
drive(s); check the docs).
Further considerations that may have to be taken into account:
Also you should make sure that your A: drive is at the end of the floppy 
cable and has a terminating resistor installed (it already should have).  
Drive B should be in the middle with the terminating resistor removed.
 CG>     I'm also the one that couldn't copy A: to B: with only one
 CG> floppy. :)
Didn't by any chance have the B: drive select on in the BIOS at the time, did 
you?
--- Sqed/32 1.14/r15155
---------------