In a message dated 13 Jul 96  12:38:02, Rick Van Ruth wrote:

 RVR> Hi All,

 RVR> A few in here will no doubt have had a varying amount of amusement with
 RVR> my attempts at trying to network my Amiga and a clone via ethernet
 RVR> cards ;-)

 RVR> Well, as a bit of a renewal to my own self-esteem and also as
 RVR> information to any other prospective ethernet networker, I include some
 RVR> interesting information.

 RVR> This only applies *if* you have a Quicknet card as your Amiga's
 RVR> ethernet card.

 RVR> To attempt a TCP ethernet connection to Win95 based PC's (or Wolverine
 RVR> based Win3.11 pc's or I also suspect OS/2 Warp connect TCP V3 or later
 RVR> pc's) using AmiTCP and QuickNet.device as your Sana II driver, then you
 RVR> must ensure you have the latest QuickNet.device.

 RVR> This device will have a version number later than 2.47 and be dated
 RVR> 12/7/96 or later. Any earlier versions of this device simply will not
 RVR> work!

Well I have to say that I have it working perfectly here at home.
I can see the Amiga drives from the PC using Samba. I can read/write to
them. I can use FTP/WWW/EMAIL both from and to the PC to my Amiga's. I can
access the Laserjet printer that is on my PC from my Amiga. I can also
access the drives (the ones that have sharing turned on) from my PC.

---
Internet prefered address johnv{at}voyager.co.nz     
Internet secondary        johnv{at}tower.actrix.gen.nz

--- DLG Pro v1.1u5/PDQMail v2.60