Thomas Seeling,
  In a message on 17 December, you wrote to me :

TS> The NCR SCSI BIOS _is_ used, since it is protected-mode 
TS> capable. The CAM driver only routes the requests from the 
TS> system to it.

Of course you are correct. NCR controllers *NEED* BIOS32 support
either supplied by the motherboard manufacturer (ASUS for example),
or built into the controller (NCR 815 for example). It is not the
same as ISA devices which can rely solely on the device driver.
--- Maximus/2 3.01