From: Felix Miata 
@X-Yahoo-Profile: mrmazda73
@Mime-Version: 1.0
@Mailing-List: list os2hardware{at}yahoogroups.com; contact
os2hardware-owner{at}yahoogroups.com
@Delivered-To: mailing list os2hardware{at}yahoogroups.com
@Precedence: bulk
@List-Unsubscribe: 
@Date: Thu, 17 Jul 2003 11:11:20 -0400
Subject: Re: SCSI - SCA 80 To 68 Converter
Reply-To: os2hardware{at}yahoogroups.com
@Content-Type: text/plain; charset=US-ASCII
@Content-Transfer-Encoding: 7bit

Ralph Cohen wrote:
 
> I believe that both the adapter and drive must have different SCSI IDs
> set.  If the adapter defaults to something other than 0 and the drive
> is set to 0 then that setup would work, but if you have more than one
> drive they cannot both be set to 0 so at least one of them must be
> jumpered to a different address.

NCR/Symbios/LSILogic HBA's are always ID 7 except on a very few models
that allow you to change it.
-- 
"Do not let the sun go down while you are still angry."
                                                Ephesians 4:26 NIV

 Team OS/2 ** Reg. Linux User #211409

Felix Miata  ***  http://members.ij.net/mrmazda/


------------------------ Yahoo! Groups Sponsor ---------------------~-->
Buy Ink Cartridges or Refill Kits for Your HP, Epson, Canon or Lexmark
Printer at Myinks.com. Free s/h on orders $50 or more to the US & Canada.
http://www.c1tracking.com/l.asp?cid=5511
http://us.click.yahoo.com/sOykFB/k9VGAA/ySSFAA/9rHolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, send an email to:
os2hardware-unsubscribe{at}yahoogroups.com

 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 



---