BO LORENTSEN wrote to ALL  about NT and HPFS in other than
BL>My wife don't understand me, so I hope you can help me out :-)
Many of us have that same problem! 
BL>I like to know if any of you have ever tryed to install HPFS support
BL>onto a NT 4 other than the US version (who of cause works :-)) ? I
BL>have tryed more than ones, but with no luck !
It's my understanding you can use the pinball.sys file from version 3.51 
with NT 4.0 and HPFS will work.  Now, since I have never done it or have 
had any reason to do it, I can't tell you first hand.  BTW, as you can 
well imagine, it's not supported by MS.
BL>What is the difference between the US version of NT 4 and the foreign
BL>language version, except for the language of the interface ? I have
BL>discovered errors in the driver administration too, fx. I can stop
BL>the "parallel" driver in the US version, but I get a trap (blue
BL>screen) in the DK version, by doing the same driver stop (at the same
BL>administrator level) --- why.
I have no experience with versions of NT other than the US/Canadian one, 
so I can't help you out here.  A good place to find the answer out to 
this one is the Microsoft NT Newsgroups.  If you have Internet access 
and a Newsreader, point your Newsreader to MSNEWS.MICROSOFT.COM and 
monitor posts from: microsoft.public.windowsnt.apps, 
microsoft.public.windowsnt.setup, and microsoft.public.windowsnt.misc.
You'll find a wealth of information there since the knowledgeable 
posters are usually Microsoft MVPs.
charles.scaglione@why.net
CMPQwk 1.42 1262
--- QScan/PCB v1.19b / 01-0530
---------------