Hello Frank,
On (10 Jun 97) Frank Mallory wrote to Phil Heberer...
 FM>  PH>I don't know if it will be of use to you, but *I* have
 FM> occasionally used a form scanned to graphic format, then used the
 FM> Advance feature for placement of the cursor when filling out the
 FM> form. When printing the completed form, set the watermark for 100%
 FM> fill. If you just want to print the data on pre-printed forms,
 FM> print without graphics.
 FM> I got the advance to work OK, but I can't get the form to print dark.
 FM> When retrieving the image, I went in and set fill to 100%, but it
 FM> doesn't make any difference. You said to set fill when printing the
 FM> completed form, but I don't see anything on the print menu that
 FM> applies to fill.
 FM> What am I missing?
I don't see that you missed anything, but perhaps your printer doesn't
handle watermarks the same as mine. The fill isn't on the print
dialogue, as you noted, but what I meant was setting fill to 100% prior
to printing. Using the graphic as full page with wrap set to through
may work for you, as Bill White suggested.
Cheers,
Phil
... C program run.  C program crash.  C programmer quit.
--- PPoint 2.02
---------------