In-Reply-To: 
@X-Mailer: MR/2 Internet Cruiser Edition for OS/2 v2.37/37 
@Message-Id: 
From: "Steven Levine" 
@X-Yahoo-Profile: steve53hoo
@Mime-Version: 1.0
@Mailing-List: list os2hardware{at}yahoogroups.com; contact
os2hardware-owner{at}yahoogroups.com
@Delivered-To: mailing list os2hardware{at}yahoogroups.com
@Precedence: bulk
@List-Unsubscribe: 
@Date: Thu, 17 Jul 2003 21:49:01 -0700
Subject: Re: SCSI - SCA 80 To 68 Converter
Reply-To: os2hardware{at}yahoogroups.com
@Content-Type: text/plain; charset=US-ASCII
@Content-Transfer-Encoding: 7bit

In , on 07/17/03 
   at 12:57 PM, "Don[ald] O. Woodall" said:

>>As others have said there's wide variations in quality of SCA-80
>>adapters, athough based on the above, I suspect your problem may be the
>>inability to the from CD.  Are you attempting to boot from CD whent he
>               ^
>             read ?

Yes, typing too fast again.

I'm not sure it you have this totally solved, so I'll post my comments
anyway.

>     Yes, I am booting from CD when the above happens.

Which one?  eCS 1.0 or eCS 1.1?  It matters because each uses a different
emulation mode so a CD read failure can produce different messages for a
similar failure.

If you haven't done this already, I would try booting the CD with not
other drives on the bus.  Once this works, you can start adding hard
drives until you isolate the failure.

>     In case it matters, the CD-ROM drive is a 68 pin
>drive.

It really should not.

Steven


-- 
----------------------------------------------------------------------
"Steven Levine"   MR2/ICE 2.37
#10183 Warp4/FP15/14.093c_W4
www.scoug.com irc.webbnet.info irc.fyrelizard.org #scoug (Wed 7pm PST)
----------------------------------------------------------------------


------------------------ Yahoo! Groups Sponsor ---------------------~-->
Free shipping on all inkjet cartridge & refill kit orders to US &
Canada. Low prices up to 80% off. We have your brand: HP, Epson, Lexmark
& more.
http://www.c1tracking.com/l.asp?cid=5510
http://us.click.yahoo.com/GHXcIA/n.WGAA/ySSFAA/9rHolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, send an email to:
os2hardware-unsubscribe{at}yahoogroups.com

 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 



---