In-Reply-To: 
@X-Mailer: MR/2 Internet Cruiser Edition for OS/2 v2.27/27 
From: mwizard99{at}comcast.net
@Mime-Version: 1.0
@Mailing-List: list os2hardware{at}yahoogroups.com; contact
os2hardware-owner{at}yahoogroups.com
@Delivered-To: mailing list os2hardware{at}yahoogroups.com
@Precedence: bulk
@List-Unsubscribe: 
@Date: Sun, 20 Jul 2003 20:37:24 -0500
Subject: Re: AHA-2940UW BIOS flash?
Reply-To: os2hardware{at}yahoogroups.com
@Content-Type: text/plain; charset=US-ASCII
@Content-Transfer-Encoding: 7bit

In , on 07/21/03 
   at 11:15 AM, Mike O'Connor  said:

>>>  
>>

>Hi Mark,
>Which version of the OS? What size id the disk? what do you boot with - 
>IBM BM/other/direct from Primary?

OS/2 Warp v4 FP12, 9G Segate LVD disk.  Using either System Commander v2.3
or normal DOS 6.22 boot.

>Which .ADD driver version are you using?  What was the geometry of the 
>disk before and after updating the SCSI-BIOS.

The U2W .add reports version 1.1 dated 10-15-2001

>Was that a BOOTOS2 type floppy boot with original .add drivers? I think I
>read somewhere - can't locate it at the moment - that the new  2940UW
>[note UW not U2W] version 3.10.0 has changed the way that the  drives are
>loaded.

OS/2 is probably not involved in this because the System Commander and DOS
boot disk what is hit first in my boot system.  

>I had no bad experience with 2940UW upgrade - everything recognised.

>You did remember to have NOTHING connected to the HBA when booting with 
>the Flash-diskette didn't you?

Yes, I followed the directions to the letter.  And I even tried to move
the controller to another slot to see if that mattered.



TIA Regards,
-Mark
-- 
---------------------------------------------------------
Madness takes its toll.  Please have exact change.
---------------------------------------------------------


------------------------ Yahoo! Groups Sponsor ---------------------~-->
Buy Ink Cartridges & Refill Kits for Your Epson at Myinks.com
Free shipping on orders $50 or more to the US and Canada.
http://www.c1tracking.com/l.asp?cid=5705&lp=home/epson.asp
http://us.click.yahoo.com/brYXfA/_xWGAA/ySSFAA/9rHolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, send an email to:
os2hardware-unsubscribe{at}yahoogroups.com

 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 



---