TIP: Click on subject to list as thread! ANSI
echo: os2hardware-l
to: All
from: `Mike O`Connor`
date: 2003-07-20 21:15:46
subject: Re: AHA-2940UW BIOS flash?

In-Reply-To: 
From: "Mike O'Connor" 
@X-Yahoo-Profile: mikeoconwarp
@Mime-Version: 1.0
@Mailing-List: list os2hardware{at}yahoogroups.com; contact
os2hardware-owner{at}yahoogroups.com
@Delivered-To: mailing list os2hardware{at}yahoogroups.com
@Precedence: bulk
@List-Unsubscribe: 
@Date: Mon, 21 Jul 2003 11:15:47 +1000
Subject: Re: AHA-2940UW BIOS flash?
Reply-To: os2hardware{at}yahoogroups.com
@Content-Type: text/plain; charset=ISO-8859-1
@Content-Transfer-Encoding: 7bit

mwizard99{at}comcast.net wrote:

>Everyone,
>
>I downloaded the 2940u2w v310 bios update (from v2.01.0).  I applied it
>and it was successful.
>
>Upon reboot, the system reported the new bios, and reported all my drives
>properly.
>
>However, the system would no longer boot to the HD.
>
>I get the "SYSTEM BOOT DISK FAILED. PLEASE INSERT BOOT DISK" 
or something
>very similar.
>
>I can boot from floppy.  And I can access the HD contents (read, copy, run
>programs etc.).  I can use FDISK /MBR to reset the master boot record.  I
>can use FDISK to set the active partition.
>
>I've played with my computer bios settings, and my SCSI bios settings as
>much as I could, but could not get the system to boot properly from HD.
>
>Once I restored my bios back to the original, it boots fine again.
>
>Has anyone run into this problem and can shed some light on it for me?
>
>I'd appreciate any feedback.
>
>TIA Regards,
>-Mark
>  
>

Hi Mark,
Which version of the OS? What size id the disk? what do you boot with - 
IBM BM/other/direct from Primary?
Which .ADD driver version are you using?  What was the geometry of the 
disk before and after updating the SCSI-BIOS.
Was that a BOOTOS2 type floppy boot with original .add drivers?
I think I read somewhere - can't locate it at the moment - that the new 
2940UW [note UW not U2W] version 3.10.0 has changed the way that the 
drives are loaded.

I had no bad experience with 2940UW upgrade - everything recognised.

You did remember to have NOTHING connected to the HBA when booting with 
the Flash-diskette didn't you?

-- 
Regards,
Mike

Failed the exam for
--------------------
MCSE - Minesweeper Consultant and Solitaire Expert
--------------------



------------------------ Yahoo! Groups Sponsor ---------------------~-->
Free shipping on all inkjet cartridge & refill kit orders to US &
Canada. Low prices up to 80% off. We have your brand: HP, Epson, Lexmark
& more.
http://www.c1tracking.com/l.asp?cid=5510
http://us.click.yahoo.com/GHXcIA/n.WGAA/ySSFAA/9rHolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, send an email to:
os2hardware-unsubscribe{at}yahoogroups.com

 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 



---
* Origin: Waldo's Place USA Internet Gateway (1:3634/1000)
SEEN-BY: 633/267 270
@PATH: 3634/1000 12 106/2000 633/267

SOURCE: echomail via fidonet.ozzmosis.com

Email questions or comments to sysop@ipingthereforeiam.com
All parts of this website painstakingly hand-crafted in the U.S.A.!
IPTIA BBS/MUD/Terminal/Game Server List, © 2025 IPTIA Consulting™.