=============================================================================
* Forwarded by Paul Edwards (3:711/934.9)
* Area : OS2_Z3 (OS2_Z3)
* From : Paul Edwards, 3:711/934.9 (Friday May 13 1994 17:47)
* To   : All
* Subj : soundblaster 16 at irq 10
=============================================================================
Hello All!

Because I already have my com port at IRQ 5, I need to run the soundblaster
16 at IRQ 10.  Unfortunately the IRQ change isn't settable on the card
itself, it is done via software.  Under DOS, with:

DEVICE=C:\SB16\DRV\CTSB16.SYS /UNIT=0 /BLASTER=A:220 I:10 D:1 H:5

it works fine.  If I do a warm-reboot to get to OS/2, then OS/2 works fine
also.  However, if I do a cold-boot onto OS/2, then I don't get any sound
(although the CDROM works).  Here is my OS/2 config:

DEVICE=E:\MMOS2\SB16D2.SYS 1 1 5 10 220 8 /N:SBAud1$
DEVICE=E:\MMOS2\AUDIOVDD.SYS SBAud1$
BASEDEV=SBCD2.ADD /P:220

Anyone know what I'm doing wrong?  Thanks + bye.


Paul

--- GoldED/2 2.42.G1114