| TIP: Click on subject to list as thread! | ANSI |
| echo: | |
|---|---|
| to: | |
| from: | |
| date: | |
| subject: | Re: Sorting Out Bad Hardware |
From: Felix Miata
@X-Yahoo-Profile: mrmazda73
@Mime-Version: 1.0
@Mailing-List: list os2hardware{at}yahoogroups.com; contact
os2hardware-owner{at}yahoogroups.com
@Delivered-To: mailing list os2hardware{at}yahoogroups.com
@Precedence: bulk
@List-Unsubscribe:
@Date: Thu, 31 Jul 2003 19:06:25 -0400
Subject: Re: Sorting Out Bad Hardware
Reply-To: os2hardware{at}yahoogroups.com
@Content-Type: text/plain; charset=US-ASCII
@Content-Transfer-Encoding: 7bit
Don[ald] O. Woodall wrote:
> at 06:40 PM, Felix Miata said:
> >> Well, FINALly, I have proved that the Tyan Trinity
> >> 100AT, S1590, motherboard, I recently bought, is just fine.
> >:-)
> >> I just threw an AMD K6-2/450 in the trash. Once I
> >> plugged a "new" AMD K6-2/500 into the motherboard,
> >> Windows 3.11 would install and not crash at the end of
> >> diskette 6.
> >Maybe the voltage wasn't right. Early K6/2's used 2.4v, while later ones
> >use less. Want to mail it to me to check out?
> You mean I have to dig that out of the trash TOO!
> Once I got the heatsink separated from the CPU chip,
> I could see that it was 2.4 volts.
> Well, I could always put it back in and set the
> M/B to 2.4 volts and try installing Windows 3.11 again
> and see if it would go.
> Or are you looking for a free CPU?
I'd hate to pay more than postage for a "bad" CPU, but I do have a
friend's 200 MHz box here that I'm supposed to make go fast enough to
run software that recommends 266 MHz or better. Until I get the manual
for it I don't know if it can be made to use a K6/2 on the existing
motherboard. Sure hate to see usable PC parts go to waste though.
--
"Do not let the sun go down while you are still angry."
Ephesians 4:26 NIV
Team OS/2 ** Reg. Linux User #211409
Felix Miata *** http://members.ij.net/mrmazda/
------------------------ Yahoo! Groups Sponsor ---------------------~-->
Buy Ink Cartridges or Refill Kits for Your HP, Epson, Canon or Lexmark
Printer at Myinks.com. Free s/h on orders $50 or more to the US &
Canada. http://www.c1tracking.com/l.asp?cid=5511
http://us.click.yahoo.com/sO0ANB/LIdGAA/ySSFAA/9rHolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, send an email to:
os2hardware-unsubscribe{at}yahoogroups.com
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
---
* Origin: Waldo's Place USA Internet Gateway (1:3634/1000)SEEN-BY: 633/267 270 @PATH: 3634/1000 12 106/2000 633/267 |
|
| SOURCE: echomail via fidonet.ozzmosis.com | |
Email questions or comments to sysop@ipingthereforeiam.com
All parts of this website painstakingly hand-crafted in the U.S.A.!
IPTIA BBS/MUD/Terminal/Game Server List, © 2025 IPTIA Consulting™.