On May 09, 1996 at 18:54, Paul Edwards of 3:711/934.9 wrote:

 PE> David, Netcomm are not even telling me what the result of calling
 PE> a Melbourne Interlink is.  Would you be able to call the number
 PE> below, and after the connect, just hang up, so that I can see
 PE> whether you got an MNP connect or what?  Thanks + bye.  Paul.

atdtw14560393881547
Initialise.. 00003mS
Offhook.. 00638mS
Listening.. 00721mS
Call Progress.. 00826mS
Call progress tones with ON periods less than 10mS ignored (S52)
Call progress tones with OFF periods less than 300mS ignored (S53*10)

ON: 00000mS OFF: 06563mS 10 10 10 10 10 10 10 10 10 10
RINGING
Connect Auto.. 11438mS
Auto OK.. 0076 23566
RLSD UP 23569mS
CTS UP 23573mS
Connected at 0076 23579
Initial EQM = 0002 23585
ARQ Start 00000
V.42 attempt 00000
SYN detected: extended MNP timeout 02900
Packet received 02920
LR Received..
Length=021
Type=001
Link level=002
1: Protocol ID parameter 001 006 001 000 000 000 000 255
2: MNP framing mode=003sync
3: Window size=008
4: Packet size=00064
8: Fixed Header Sizes   Max data size = 256   MNP10 requested
OK, send LA 02980
Send 2nd LA 03100
MNP succeed 03200

Terminal      : 57600  8 data bits  No Parity
Line          : 14400  V.32
Error Correct : MNP 10
Compression   : None
Encryption    : None
Current EQM   : 003
EQM Retrain at: 098
Rx Level(-dBm): 030 (040 )

CONNECT 14400/REL-10

    - dave
    d.begley{at}ieee.org

---