Hi Paul,

I'm using ModemTrans again, but this time to disable the 3429 symbol rate
on calls to your board, and it appears to have done the trick.

The following log extract looks pretty good to me...

======================================================================
: 13 May 06:41:44 BINK Dialing 02-436-1785
# 13 May 06:42:09 BINK Connect 28800/Arq/V34/Lapm/V42Bis
* 13 May 06:42:12 BINK Ten Minute Limit (3:711/934{at}fidonet)
[ ... ]
# 13 May 06:42:24 BINK Usrobotics Courier V.Everything Link Diagnostics...
# 13 May 06:42:25 BINK Modulation               V.34
# 13 May 06:42:25 BINK Carrier Freq    ( Hz )   1829/1829
# 13 May 06:42:25 BINK Symbol Rate              3200/3200
# 13 May 06:42:25 BINK Trellis Code             64S-4D/16S-4D
# 13 May 06:42:25 BINK Nonlinear Encoding       On/Off
# 13 May 06:42:25 BINK Precoding                Off/On
# 13 May 06:42:25 BINK Shaping                  On/On
# 13 May 06:42:25 BINK Preemphasis     (-Db )   6/2
# 13 May 06:42:25 BINK Recv/Xmit Level (-Dbm)   30.2/11.9
# 13 May 06:42:25 BINK Snr             ( Db )   36.0
# 13 May 06:42:25 BINK Near Echo Loss  ( Db )   15.8
# 13 May 06:42:25 BINK Far Echo Loss   ( Db )   22.9
# 13 May 06:42:25 BINK Roundtrip Delay (Msec)   19
# 13 May 06:42:25 BINK Data Compression         V42Bis 2048/32
# 13 May 06:42:25 BINK Equalization             Long
# 13 May 06:42:25 BINK Fallback                 Enabled
# 13 May 06:42:25 BINK Protocol                 Lapm Srej 128/15
# 13 May 06:42:25 BINK Speed                    28800/28800
# 13 May 06:42:25 BINK Last Call                00:00:10
# 13 May 06:42:25 BINK Disconnect Reason Is Disc Received
# 13 May 06:42:25 BINK Ok
: 13 May 06:42:27 BINK Exit after compressed mail with errorlevel 70
====================================================================

Regards, Bill

--- Msgedsq/2 3.20