Greetings,
Recently I aquired a Tandberg 3800 SCSI-2 tape drive as a replacement 
for my old Colorado "floppy tape" drive.  I had been using BackMaster 
with the old drive but since it does not support SCSI drives I bought 
Arcada Backup Personal Version 2.0 for OS/2.  This product allegedly 
supports SCSI drives but only shipped with drivers for parallel and 
floppy tape drives and won't recognize my SCSI tape drive.
The big problem is that Seagate bought out Arcada (I think), and I 
cannot find anything on Seagate's web site for this particular version 
of the software.  ÿ
The hardware in question consists of the above mentioned tape drive 
connected to a Promise DC440 SCSI-2 controller (Adapted 1540 clone, 
uses OS/2's AHA154x.ADD driver).  I do have OS/2's ASPI drivers and the 
OS2SCSI.DMD driver installed also.  The System Information Tool 
recognizes the drive.  
Anyone have any experience with using Arcada Backup 2.0 for Warp with 
an SCSI QIC tape drive?  
Thanks,
Greg
 * 1st 2.00 ~ Never blame the rainbows for the rain.
--- QScan/PCB v1.19b / 01-0671
---------------