Thanks for replying, Scott:
 SD> As far as I know, other people are using Maximus with 
 SD> Digiboards and the DigiFossil driver without 
 SD> difficulties, so my guess is that something in your 
 SD> configuration needs to be adjusted.
I guess getting their E-Mail/Netmail addresses are out of the question, eh???
 SD> Are you sure that your modem cables are wired exactly 
 SD> as the documentation specifies?
Yes!!!
 SD> Have you set up the appropriate Mask Handshaking lines in max.ctl?
Everything is set for CTS/RTS on the Digiboard and in Max.Ctl!!!
 SD> Does your modem initialization string include the appropriate 
rameters?
I'm using an external GVC 28.8...Neither the Digiboard manuals or the modem 
manuals say anything about adding any parameters to use the two together but 
I assume that the Init string is fine since FrontDoor works perfect with the 
modem, Digiboard, and Digifossil!!! It only screws up when it tries to load 
Maximus and the Logon prompt starts repeating and continues as it scrolls off 
the screen!!!
 SD> Are you using Send Break to Clear Buffer in max.ctl?
No...Should I be??? Again, I'm using a GVC 28.8 external and I don't have HST 
and the Manual doesn't say anything about my modem having internal Buffers!!!
As I've stated before...I have no flow control problems transferring files 
with my Mailer!!! I send & recieve Mail and transfer files from other BBSes 
using the Term program in my Mailer with excellent speeds and no 
difficulty!!! The only problem I have is if a user drops from the mailer to 
Maximus and I get the logon prompt echoing!!! The problem has to be in the 
Max configs since everything else before that is working fine!!! Is there 
anything you need to see in the configs or do you want the Hex numbers from 
the Digifossil Stat feature???
Your help in this matter is greatly appreciated!!! :)
P.S.- There is however one weird thing that happens with my Mailer!!! If I 
take my BBS down to run a Backup program or something without turning my 
computer off and then I reload my Mailer for that node I get a ton of "RING" 
messages scrolling up & off the screen before a Connect 1200/75 and then 
Carrier lost and then the Modem resets with an OK!!! I do have the buffers on 
the Digiboard on...are they suppose to be on???
--- Maximus 3.01
---------------