-=> Quoting Bill Reyna to ARTHUR NEWKIRK <=-
 BR> again to clear the line. If you need to call a number to get into a
 BR> system and then allow a telco number string proceed to dial a number at
 BR> that location you need s/w that
If you're trying to dial out of a PBX or have to get
a router first then use the dial modifier command W
Such as ATD^091W  Or use the 091W as a dial prefix in your s/w
 BR> your dailing string commas [,,] which add 1 sec. pause each but then
2 secs default (settable by S8, subject to country config selected)
In US/Canada believe that Flash Hook is permitted.  So for BBSs
with Ringback on (one ring, go on hook, then ring again to get BBS)
use the ! command.  This would make your dialstring look like
ATD^xxx-yyy-zzz!xxx-yyy-zzz  The time your modem is back on hook
is settable by S29 range 0 - 255 tenths of a second (default 0)
 BR> you need to experiment at it for best results. -_-_-Bill
I've never done this coz flash hook isn't allowed in UK
so would be interested in reports and best setting for s29= for US
rgdZ
Richard
--- FMail/386 1.02
---------------