> One should be able to contact some nodes without any node_remap entries now.
> Kim mentioned you should make sure your bcfg4://local/general/OK_poll_flags
> contains "(,ITN|,IBN)"
> (or similar)
> and bcfg4://local/modem/dial is something like:
> 1:   ATR   |   ,IBN
> 2:   ATD   |   .

Janis,
I tried what you're suggesting here, but it didn't work for me.  I currently
have the following (which seems to work, but uses a node_remap):
local->general->OK_poll_flags: (BND|IBN|ITX|IP) local->modem->dial:
~ATR | ,IBN
~ATD | ,IP
~ATD | ,ITN

node_remap:
,1:153/7715.0,BandMaster.tzo.com,Vancouver_BC,Irex_Hinton,bandmaster.tzo.com,30
0,CM,MO,IBN:bandmaster.tzo.com

If I change these to your suggestion and remove my node_remap for 1:153/7715,
then try polling 1:153/7715, I get a "can't find phone number" error.

This was probably the most frustrating part trying to get BBBS set up because
of a lack of documentation in this area. My existing setup is a mishmash of
what I've found in the forums plus trial and error.

I'd appreciate any suggestions from you as to what I might be doing wrong and
what I can improve.

Thanks :)

Ian

--- BBBS/LiI v4.10 Dada-2