Kris Steenhaut schrieb:
>
> 
> An educated guess tells me your scsi-termination and/or Adaptec settings 
> aren't right.
> 
It's definitely the mainboard BIOS that sees that there is no IDE HD 
attached and is whiningh about that. Pressing enter results in booting 
from SCSI ID0, selecting BBS-0 in the BIOS boot menue boots from the 
SCSI CD - after "disk 1 is not ready" followed by Enter key.

I know this from an really new ABIT and some Elitegroup mainboards. 
Switching adapter + Disk + CD + cable onto another mainboard and all 
works perfectly.

When nothing helps one has to fiddle around which PCI slot will able 
to see the SCSI BIOS and will the mashine boot from it. Not each PCI 
slot in combination with other PCI cards will be able to handle SCSI 
in any manner. But at least "drive 1 is not ready" is inevitable until 
an IDE disk is inerted.

-- 
Tschau/Bye

Herbert Rosenau
EDV Beratung & Programmierung
Lindelbrunnstr. 53a
76767 Hagenbach

Tel: 49-7273-919416
Fax: 49-7273-93072                     http://www.dv-rosenau.de/


------------------------ Yahoo! Groups Sponsor --------------------~--> 
Make a clean sweep of pop-up ads. Yahoo! Companion Toolbar.
Now with Pop-Up Blocker. Get it for free!
http://us.click.yahoo.com/L5YrjA/eSIIAA/yQLSAA/E8folB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2user/

 To unsubscribe from this group, send an email to:
    os2user-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 


---