Kris Steenhaut schrieb:
> 
> Mike Coane schreef:
> 
> 
>>boot, after the Adaptec SCSI,
>>
> 
> 
> Sure about that? For the first stop only can come after the last 
> basedev= entry has been run, usually basedev=os2dasd.dmd .
> 
> 
>>I get a message in the
>>lower left hand corner of the screen that says
>>something like "Drive 3 is not ready.
>>
> 
> We need to now not "something like" but "exactly what"...
> 
> To me it doesn't look like  an Adaptec problem.
> 
It's a problem of the mainboard BIOS! Elitegroup is known for that 
problem. The mainboard BIOS thinks anybody on the world is using IDE.
On my computers i hove to use BBS0 to get booted from Symbios CD, SCSI 
to boot from HD0 - but in any way "disk 1 is not ready" from the BIOS.

No, even ABIT owns the same problem.

-- 
Tschau/Bye

Herbert Rosenau
EDV Beratung & Programmierung
Lindelbrunnstr. 53a
76767 Hagenbach

Tel: 49-7273-919416
Fax: 49-7273-93072                     http://www.dv-rosenau.de/


------------------------ Yahoo! Groups Sponsor --------------------~--> 
$9.95 domain names from Yahoo!. Register anything.
http://us.click.yahoo.com/J8kdrA/y20IAA/yQLSAA/E8folB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2user/

 To unsubscribe from this group, send an email to:
    os2user-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 


---