R.Wieser  wrote:
>
> Try lowering the speed to 9600 baud and see if it will work.
>
>

Alas, it not only doesn't work, it seems to cause worse problems.
Setting the console to 9600 baud makes no discernible difference
in the blizzard of (mostly) carriage returns, but it seems to cause
lockup a couple minutes after the screen session is opened. Had to
pull the plug to get the machine unstuck.

I'm tempted to think this is a tty configuration error, but whether
it's at the screen session end or the console session end isn't
obvious. When I type stty -a /dev/console the reply is:

bob@raspberrypi:~ $ stty -a /dev/console
stty: when specifying an output style, modes may not be set

The man page implies -a should return settings for the device.

Thanks for your attention!

bob prohaska

>

--- SoupGate-Win32 v1.05