** Reply to note from "Don{ald} O. Woodall"
 Mon, 12 Jan 2004 15:50:02 -0500

> >LVM.exe and miniLVM (whatever exe that is) both don't work. 
> >I do not know what the management console is as my eCS 1.1 is 
> >still in the box here and have ver 1.01 on my DT box. 
>  
> Gerry 
>  
>      Your last paragraph confuses me. 
>  
> >I do not know what the management console is, as my eCS 1.1 is 
> >still in the box here and... 
>  
> Where as above you say: 
>  
> >Then using the Command Line LVM.exe in 1.1, we could NOT make Vol E

Sorry for any confusion, Donald. On this Thinkpad/HDD, we got the same
POOR results (not able to make volume bootable) using the miniLVM of the
install phase, OR by using the CL LVM.exe from a booted eCS 1.1 on the D:
volume that was installed below the 1024 boundary.  Clear ??

Thanks for the line art on the "Management Console".  Obviously
just a fancy
name and way to get to a command line/editors etc.

... Gerry 


Gerry Chilibeck.......in West Vancouver, Canada
Runnin' OS/2 W4.5/14.085, eCS 1.01, Lotus SS 1.6, PRMail 3.0, 
        NS 4.61, Moz 1.6a, EmTec FTP, DragText 3.8, 
        Key Ring/2, XWorkplace 1.0.1, PN/2 b153, RSJ 3.08      

 

Yahoo! Groups Links

To visit your group on the web, go to:
 http://groups.yahoo.com/group/os2hardware/

To unsubscribe from this group, send an email to:
 os2hardware-unsubscribe{at}yahoogroups.com

Your use of Yahoo! Groups is subject to:
 http://docs.yahoo.com/info/terms/ 



---