In , on 01/07/04 
   at 10:30 PM, Charles May  typed:

>I have not checked to see if the driver is the latest.  I used ECS disk 
>2 for driver selection.  I checked the bios to see if I had something 
>like what is shown below but I did not see anything that would do that.  
>The only thing I saw that I did not explore was something called OS and 
>that was either on or off. 

Chances are that there's an irq conflict.  Check rmview /irq and also run
pci.exe.  You may have to move stuff around from one pci slot to another. 
Depending on the mobo bios, you may also need to fiddle with PCI IRQ
assignments.
 
-- 
 Julian Thomas:   jt{at}jt-mj.net    http://jt-mj.net
 In the beautiful Finger Lakes Wine Country of New York State!
 Boardmember of POSSI.org - Phoenix OS/2 Society, Inc  http://www.possi.org
 -- --
 Use a spreadsheet to do the math, but check it by hand just to be sure.




 

Yahoo! Groups Links

To visit your group on the web, go to:
 http://groups.yahoo.com/group/os2hardware/

To unsubscribe from this group, send an email to:
 os2hardware-unsubscribe{at}yahoogroups.com

Your use of Yahoo! Groups is subject to:
 http://docs.yahoo.com/info/terms/ 



---