Charles May wrote:

>This computer comes equipped with 6 USB ports in the back and 2 in the 
>front.  The last message I sent indicates that by moving the modem and 
>the sound card I am down to a conflict on IRQ 9 with one of the USB 
>ports.  All the USB ports are 2.0.  I have noted in the config.sys file 
>that there is one statement that says BASEDEV=USBEHCD system and then 4 
>identical statements that say BASEDEV=USBUHCD.sys.  I presume that by 
>putting a rem in front of one of these duplicate statements I can make 
>the conflict go away.
>

Hi Charles,
Try REMming out all the USBUHCI entries [guessing].
If no change try them selectively.
Do you have an entry in the BIOS for Legacy USB?

-- 
Regards,
Mike

Failed the exam for
--------------------
MCSE - Minesweeper Consultant and Solitaire Expert
--------------------
[ISP blocks *.exe attachments]
[Please use zipped versions of above]



 

Yahoo! Groups Links

To visit your group on the web, go to:
 http://groups.yahoo.com/group/os2hardware/

To unsubscribe from this group, send an email to:
 os2hardware-unsubscribe{at}yahoogroups.com

Your use of Yahoo! Groups is subject to:
 http://docs.yahoo.com/info/terms/ 



---