** Reply to note from "Don{ald} O. Woodall"
 Sun, 11 Jan 2004 10:44:36 -0500

> Have you tried booting to the Management Console and running the 
> character mode "LVM.exe" from a Window Session, to see if it behaves 
> differently?

Among our toils, we built a blank HD with C: 4.5gb, D: 2.0gb E: 3.0gb using
eCS 1.1 mini LVM and installed successfully into Vol D:.  

Then using the Command Line LVM.exe in 1.1, we could NOT make Vol E
bootable (it spans the 1024 boundary).  (We could make C: bootable).

So, if this is what you mean by "character mode LVM.exe" well we have
been there, done that.  LVM.exe and miniLVM (whatever exe that is) both
don't work. I do not know what the management console is as my eCS 1.1
is still in the box here and have ver 1.01 on my DT box.

... Gerry



Gerry Chilibeck.......in West Vancouver, Canada
Runnin' OS/2 W4.5/14.085, eCS 1.01, Lotus SS 1.6, PRMail 3.0, 
        NS 4.61, Moz 1.6a, EmTec FTP, DragText 3.8, 
        Key Ring/2, XWorkplace 1.0.1, PN/2 b153, RSJ 3.08      

 

------------------------ Yahoo! Groups Sponsor ---------------------~-->
Buy Ink Cartridges or Refill Kits for your HP, Epson, Canon or Lexmark
Printer at MyInks.com. Free s/h on orders $50 or more to the US & Canada.
http://www.c1tracking.com/l.asp?cid=5511
http://us.click.yahoo.com/mOAaAA/3exGAA/qnsNAA/9rHolB/TM
---------------------------------------------------------------------~->

Yahoo! Groups Links

To visit your group on the web, go to:
 http://groups.yahoo.com/group/os2hardware/

To unsubscribe from this group, send an email to:
 os2hardware-unsubscribe{at}yahoogroups.com

Your use of Yahoo! Groups is subject to:
 http://docs.yahoo.com/info/terms/ 



---