Charles May wrote:

>I have not checked to see if the driver is the latest.  I used ECS disk 
>2 for driver selection.  I checked the bios to see if I had something 
>like what is shown below but I did not see anything that would do that.  
>The only thing I saw that I did not explore was something called OS and 
>that was either on or off. 
>The only additional information I could get was from WinXP which 
>identified pci slot 3 and pci bus 2 device 2.
>Does the choice of driver relate to the ability to detect the card?  I 
>thought I made the right choice?
>  
>
Hi Charles,

Have you run the pci.exe in the archive pci048vk.zip  that's on hobbes?
That'll tell you all you want to know about your PCI-bus and slots.
HTH

-- 
Regards,
Mike

Failed the exam for
--------------------
MCSE - Minesweeper Consultant and Solitaire Expert
--------------------
[ISP blocks *.exe attachments]
[Please use zipped versions of above]



 

------------------------ Yahoo! Groups Sponsor ---------------------~-->
Buy Ink Cartridges or Refill Kits for your HP, Epson, Canon or Lexmark
Printer at MyInks.com. Free s/h on orders $50 or more to the US & Canada.
http://www.c1tracking.com/l.asp?cid=5511
http://us.click.yahoo.com/mOAaAA/3exGAA/qnsNAA/9rHolB/TM
---------------------------------------------------------------------~->

Yahoo! Groups Links

To visit your group on the web, go to:
 http://groups.yahoo.com/group/os2hardware/

To unsubscribe from this group, send an email to:
 os2hardware-unsubscribe{at}yahoogroups.com

Your use of Yahoo! Groups is subject to:
 http://docs.yahoo.com/info/terms/ 



---