Hi David,

After flashing the Courier's new SDL, I logged on as a normal user and DLed
a few files, around 3.6Mb in total, and not a single Bler was recorded. 
Damn good S/N ratio and Tx/Rx levels too, but it still amazes me that some
of my calls are two full steps slower in Tx than Rx, although as my files
are coming in at 33600bps, I'm not about to start complaining any time
soon.  :)

--------------------------------------
USRobotics Courier Link Diagnostics...

Modulation               V.34+
Carrier Freq    ( Hz )   1959/1959
Symbol Rate              3429/3429
Trellis Code             64S-4D/64S-4D
Nonlinear Encoding       ON/ON
Precoding                OFF/ON
Shaping                  OFF/ON
Preemphasis     (-dB )   6/4
Recv/Xmit Level (-dBm)   24.4/13.1
SNR             ( dB )   39.2
Near Echo Loss  ( dB )   14.6
Far Echo Loss   ( dB )   38.4
Roundtrip Delay (msec)   3
Chars sent               720
Chars Received           3654887
Chars lost               0
Octets sent              820
Octets Received          3608480
Blocks sent              389
Blocks Received          18284
Blocks resent            0
Retrains Requested       0
Retrains Granted         0
Line Reversals           0
Blers                    0
Link Timeouts            0
Link Naks                0
Data Compression         V42BIS 2048/32
Equalization             Long
Fallback                 Enabled
Protocol                 LAPM SREJ 244/15
Speed                    33600/28800
Last Call                00:31:18
Disconnect Reason        DISC Received
-----------------------------------------

Regards, Bill
@EOT:

--- MsgedSQ/2 3.30