I fed the second vid output from my T42 to my stand alone 17" LCD.  The
T42 is a 15"  and had the most basic video card for that year.  Both are
always set at the default/native resolution of 1024 x 768.  Everything
worked straight up.  No searching for bits and pieces or setting odd
settings.

But the quality of the 17" display was pretty bad.  It had the
appearance almost of printing done on poor or damp paper that let the
ink bleed out from the edges of the characters a little.  Just fuzzy,
diffused edges.  Very bad compared to what it does very crisply with my
desktop - it's normal operation.

If the T42 had had the second or third step up in card quality would
this diffused look have been eliminated, or is this a driver problem?

Jim L, via the operating system it took IBM 15 years to kill.

-- 
"Feel inadequate? Destroy stuff and kill people." Confucious,
Socrates, Benjamin Franklin.



 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 Your email settings:
    Individual Email | Traditional

 To change settings online go to:
    http://groups.yahoo.com/group/os2hardware/join
    (Yahoo! ID required)

 To change settings via email:
    mailto:os2hardware-digest{at}yahoogroups.com 
    mailto:os2hardware-fullfeatured{at}yahoogroups.com

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

---