Follow up on MSI K8N Neo4-F

This motherboard has four PCI slot, one of which is proprietary and
dedicated to MSI proprietary communications card.  So that seems to
leave three PCI slots for OS/2 and eCS users.  The on board Marvell
88E1111 PHY nic did not work with the Genmac driver, however a SMC
1244TX PCI network card works just fine.  I did not put a lot of
effort into trying to get the on board nic to work though.  The on
board sound works just fine with the uniaud driver supplied in eCS
v1.2R.  The video card in a PCI-X Radeon ATI X700 which works well
with SNAP's 3.18 driver.

I've got 2Gb of RAM and processor is a AMD64 3800+.  So far VPC works
very smoothly, a noticable improvement over my older ABIT KT7-A with a
1800+ AMD processor.


Thanks all for the help and advice.


Joe Kempf




------------------------ Yahoo! Groups Sponsor --------------------~--> 
Yahoo! Groups gets a make over. See the new email design.
http://us.click.yahoo.com/hOt0.A/lOaOAA/yQLSAA/9rHolB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 Your email settings:
    Individual Email | Traditional

 To change settings online go to:
    http://groups.yahoo.com/group/os2hardware/join
    (Yahoo! ID required)

 To change settings via email:
    mailto:os2hardware-digest{at}yahoogroups.com 
    mailto:os2hardware-fullfeatured{at}yahoogroups.com

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

---