Hi,

Steven Levine escribi=F3:
...
>>> I suspect you have an IRQ conflict.  IIRC, the Crystal drivers don't sh=
are
>>> well.  This is the case on my 770x and the 600 is of a similar vintage.
>=20
>> How lucky! ;-(
>=20
> My sound works fine.  The 770x is sufficiently recent that the crystal
> chipset is hung off the PCI bus.  The only problem is has is after the bo=
x
> is running for a couple of weeks, the audio might stop working.  I suspec=
t
> it's an APM issue I never got around to resolving.

You really know how to give me hope :-D

>> See the attachment. Zero. Nichts. Nada. I suspect it is an ISA card :-?
>=20
>> [Non-text portions of this message have been removed]
>=20
> You need to attach as text.  The list strips binary attachments

well I guessed we were all supposed to be civilized folks here. Never=20
mind. Here we go again, but I told you: nothing.

Regards,
Alfredo.


  ----------

Craig Hart's PCI+AGP bus sniffer, Version 1.04vkA, freeware made in 1996-20=
05.
Loaded Vendor Data : "This is version 573 of this file; 10-10-2005 (D-M-Y).=
"

PCI BIOS Version 2.10 found!
Number of PCI Busses : 7
PCI Characteristics  : Config Mechanism 1 Special Cycle Mechanism 1=20

Searching for PCI Devices using the OEMHLP$ driver

 Bus 0 (PCI), Device Number 0, Device Function 0
 Vendor 8086h Intel Corporation
 Device 7192h 82443BX/ZX 440BX/ZX CPU to PCI Bridge (AGP Not Implemented)
 Command 0006h (Memory Access, BusMaster)
 Status A200h (Received Master Abort, Detected Parity Error, Medium Timing)
 Revision 02h, Header Type 00h, Bus Latency Timer 40h
 Self test 00h (Self test not supported)
 PCI Class Bridge, type PCI to HOST
 Address 0 is a Memory Address (0-4GiB, Prefetchable) : 00000000h

 Bus 0 (PCI), Device Number 2, Device Function 0
 Vendor 104Ch Texas Instruments (TI)
 Device AC16h PCI1250 PC Card CardBus Controller
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0210h (Has Capabilities List, Medium Timing)
 Revision 02h, Header Type 82h, Bus Latency Timer A8h
 Self test 00h (Self test not supported)
 Cache line size 32 Bytes (8 DWords)
 PCI Class Bridge, type PCI to Cardbus
 Subsystem ID 00921014h Unknown
 Subsystem Vendor 1014h IBM
 System IRQ (disabled), INT# A
 CardBus Bridge Information:
   PCI Bus Number 0, CardBus Bus Number 1, Subordinate Bus number 3
   CardBus Latency B0h
   Secondary Bus Command 03C0h (bus is in RESET, ints routed by ExCA)
   Secondary Bus Status  0200h (Medium Timing)
   Socket/ExCa Base Memory Address : 20301000h
   Memory   Range 0 : None
   Memory   Range 1 : None
   I/O Port Range 0 : None
   I/O Port Range 1 : None
 New Capabilities List Present:
   Power Management Capability, Version 1.0
     Supports low power State D1
     Supports low power State D2
     Supports PME# signalling from mode(s) D0, D1, D2, D3hot
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)

 Bus 0 (PCI), Device Number 2, Device Function 1
 Vendor 104Ch Texas Instruments (TI)
 Device AC16h PCI1250 PC Card CardBus Controller
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0210h (Has Capabilities List, Medium Timing)
 Revision 02h, Header Type 82h, Bus Latency Timer A8h
 Self test 00h (Self test not supported)
 Cache line size 32 Bytes (8 DWords)
 PCI Class Bridge, type PCI to Cardbus
 Subsystem ID 00921014h Unknown
 Subsystem Vendor 1014h IBM
 System IRQ (disabled), INT# B
 CardBus Bridge Information:
   PCI Bus Number 0, CardBus Bus Number 4, Subordinate Bus number 6
   CardBus Latency B0h
   Secondary Bus Command 03C0h (bus is in RESET, ints routed by ExCA)
   Secondary Bus Status  0200h (Medium Timing)
   Socket/ExCa Base Memory Address : 20300000h
   Memory   Range 0 : None
   Memory   Range 1 : None
   I/O Port Range 0 : None
   I/O Port Range 1 : None
 New Capabilities List Present:
   Power Management Capability, Version 1.0
     Supports low power State D1
     Supports low power State D2
     Supports PME# signalling from mode(s) D0, D1, D2, D3hot
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)

 Bus 0 (PCI), Device Number 3, Device Function 0
 Vendor 10C8h Neomagic Corp
 Device 0004h NM2160 MagicGraph 128XD
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
 Revision 01h, Header Type 00h, Bus Latency Timer D0h
 Minimum Bus Grant 10h, Maximum Bus Latency FFh
 Self test 00h (Self test not supported)
 PCI Class Display, type VGA
 Subsystem ID 00BA1014h NM2160 MagicGraph 128XD
 Subsystem Vendor 1014h IBM
 Address 0 is a Memory Address (0-4GiB, Prefetchable) : D0000000h
 Address 1 is a Memory Address (0-4GiB) : 20000000h
 Address 2 is a Memory Address (0-4GiB) : 20200000h
 System IRQ 11, INT# A

 Bus 0 (PCI), Device Number 7, Device Function 0
 Vendor 8086h Intel Corporation
 Device 7110h 82371AB PIIX4 ISA Bridge
 Command 000Fh (I/O Access, Memory Access, BusMaster, Special Cycles)
 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
 Revision 01h, Header Type 80h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Bridge, type PCI to Other

 Bus 0 (PCI), Device Number 7, Device Function 1
 Vendor 8086h Intel Corporation
 Device 7111h 82371AB/EB/MB PIIX4/E/M EIDE Controller
 Command 0005h (I/O Access, BusMaster)
 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
 Revision 01h, Header Type 00h, Bus Latency Timer 20h
 Self test 00h (Self test not supported)
 PCI Class Storage, type IDE (ATA)
 PCI EIDE Controller Features :
   BusMaster EIDE is supported
   Primary   Channel is at I/O Port 01F0h and IRQ 14
   Secondary Channel is disabled
 Address 0 is not present or not configured!
 Address 1 is not present or not configured!
 Address 2 is not present or not configured!
 Address 3 is not present or not configured!
 Address 4 is an I/O Port : FCF0h..FCF7h

 Bus 0 (PCI), Device Number 7, Device Function 2
 Vendor 8086h Intel Corporation
 Device 7112h 82371AB/EB/MB PIIX4/E/M USB Controller
 Command 0005h (I/O Access, BusMaster)
 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
 Revision 01h, Header Type 00h, Bus Latency Timer 30h
 Self test 00h (Self test not supported)
 PCI Class Serial, type USB (UHCI)
 Address 0 is not present or not configured!
 Address 1 is not present or not configured!
 Address 2 is not present or not configured!
 Address 3 is not present or not configured!
 Address 4 is an I/O Port : 8400h..8413h
 System IRQ 11, INT# D

 Bus 0 (PCI), Device Number 7, Device Function 3
 Vendor 8086h Intel Corporation
 Device 7113h 82371AB PIIX4 Power Management Controller
 Command 0003h (I/O Access, Memory Access)
 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
 Revision 01h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Bridge, type PCI to Other

ROM PCI IRQ routing table Tests....
 ROM IRQ routing table found at F000h:9E80h
 Table Version 1.0 - OK
 Table size 96 bytes - OK
 Table Checksum E0h - OK
 PCI Interrupt Router: 82371AB PIIX4 ISA Bridge
 IRQ's dedicated to PCI : 11=20
 The ROM PCI IRQ routing table appears to be OK.

IRQ Summary: IRQs 11,14 are used by PCI devices
Shared IRQs: IRQ 11 is shared by 2 PCI Devices

  ----------

rem *** Base devices
BASEDEV=3DTIMER0.SYS
BASEDEV=3DIBMKBD.SYS
BASEDEV=3DPRINT01.SYS
BASEDEV=3DI2OXPORT.SYS

rem --- USB support
rem BASEDEV=3DUSBOHCD.SYS
rem BASEDEV=3DUSBEHCD.SYS
BASEDEV=3DUSBUHCD.SYS
rem BASEDEV=3DUSBUHCD.SYS
rem BASEDEV=3DUSBUHCD.SYS
BASEDEV=3DUSBD.SYS /REQ:USBUHCD$,USBOHCD$,USBEHCD$
BASEDEV=3DUSBHID.SYS
BASEDEV=3DCHKDSK.SYS
BASEDEV=3DI2OSOSM.ADD
BASEDEV=3DIBM1FLPY.ADD
rem BASEDEV=3DIBM2FLPY.ADD
rem BASEDEV=3DIBM1S506.ADD
BASEDEV=3DDANIS506.ADD
BASEDEV=3DUSBMSD.ADD /FLOPPIES:0 /REMOVABLES:2
rem BASEDEV=3DUSBCDROM.ADD

rem --- Device filtering
rem BASEDEV=3DXDFLOPPY.FLT
rem BASEDEV=3DIBMATAPI.FLT
BASEDEV=3DDaniATAPI.FLT
rem BASEDEV=3DASC.ADD

rem --- Storage mounting
BASEDEV=3DOS2DASD.DMD
BASEDEV=3DOS2LVM.DMD
RUN=3DC:\OS2\SYSTEM\LVMALERT.EXE
RUN=3DC:\OS2\EXTENDFS.EXE *
BASEDEV=3DOS2ASPI.DMD /ALL
rem *** CD-ROM and removable letter
RESERVEDRIVELETTER=3DM:

rem --- Crystal
BASEDEV=3DCWAUDIO.SYS /N:BSAUD1$ /X1:50 /X2:50 /LCAPT:X1X2
DEVICE=3DC:\MMOS2\CWVAUDIO.SYS BSAUD1$
DEVICE=3DC:\MMOS2\OPL3.SYS /P:388 /N:OPL31$

rem *** This stupid daemon likes to be loaded before IFSs
DEVICE=3DC:\OS2\BOOT\APM.SYS
RUN=3DC:\OS2\APMDAEMN.EXE

rem *** File systems
rem --- Old FAT support options
rem DISKCACHE=3D512,LW,32
IFS=3DC:\OS2\JFS.IFS /AUTOCHECK:* /CACHE:8192
rem IFS=3DC:\OS2\HPFS.IFS /CACHE:2048 /CRECL:64 /AUTOCHECK:M*
IFS=3DD:\Util\System\BOOT\FAT32.IFS /CACHE:2048 /H /Q
rem CALL=3DD:\Util\System\bin\CACHEF32.EXE /S /F
rem IFS=3DD:\Util\System\BOOT\NTFS.IFS
rem IFS=3DC:\OS2\BOOT\UDF.IFS
IFS=3DC:\OS2\BOOT\CDFS.IFS /W /Q
rem --- Tonigy IFS v1.7
IFS=3DD:\MMedia\Util\Tonigy\tonigy.ifs
rem DEVICE=3DC:\OS2\BOOT\OS2CDROM.DMD /Q
DEVICE=3DD:\Util\System\boot\JJSCDROM.DMD
DEVICE=3DC:\OS2\BOOT\POINTDD.SYS
DEVICE=3DC:\OS2\BOOT\MOUSE.SYS SERIAL=3DCOM1
DEVICE=3DC:\OS2\BOOT\COM.SYS
DEVICE=3DC:\OS2\BOOT\TESTCFG.SYS
DEVICE=3DC:\OS2\BOOT\PMDD.SYS
DEVICE=3DC:\OS2\BOOT\DOS.SYS
DEVICE=3DC:\OS2\BOOT\UNICODE.SYS

DEVICE=3DC:\OS2\BOOT\USBKBD.SYS
DEVICE=3DC:\OS2\BOOT\USBMOUSE.SYS
rem DEVICE=3DC:\OS2\BOOT\USBCOM.SYS

rem --- Network protocol stack
DEVICE=3DC:\IBMCOM\PROTOCOL\LANPDD.OS2
DEVICE=3DC:\IBMCOM\PROTOCOL\LANVDD.OS2
DEVICE=3DC:\IBMCOM\LANMSGDD.OS2 /I:C:\IBMCOM /S
DEVICE=3DC:\IBMCOM\PROTMAN.OS2 /I:C:\IBMCOM
RUN=3DC:\OS2\EPW.EXE
SET DMIPATH=3DC:\DMISL\BIN
RUN=3DC:\OS2\SMSTART.EXE
CALL=3DC:\IBMCOM\PROTOCOL\NETBIND.EXE
RUN=3DC:\IBMCOM\LANMSGEX.EXE
rem --- VPN support
DEVICE=3DC:\MPTN\PROTOCOL\IPSEC.SYS
DEVICE=3DC:\MPTN\PROTOCOL\FWIP.SYS
DEVICE=3DC:\MPTN\PROTOCOL\CDMF.SYS
DEVICE=3DC:\MPTN\PROTOCOL\MD5.SYS
DEVICE=3Dc:\mptn\protocol\des.sys
rem --- NFS support
IFS=3DC:\MPTN\bin\nfs300.ifs
rem --- Normal TCP/IP
DEVICE=3DC:\MPTN\PROTOCOL\SOCKETSK.SYS
DEVICE=3DC:\MPTN\PROTOCOL\AFOS2.SYS
DEVICE=3DC:\MPTN\PROTOCOL\AFINETK.SYS
DEVICE=3DC:\MPTN\BIN\VDOSTCP.VDD
RUN=3DC:\MPTN\BIN\CNTRL.EXE
CALL=3DC:\OS2\CMD.EXE /Q /C C:\MPTN\BIN\MPTSTART.CMD >NUL
RUN=3DC:\IBMCOM\PROTOCOL\NBTCP.EXE
RUN=3DC:\MPTN\BIN\VDOSCTL.EXE
rem --- IBM LAN
DEVICE=3DC:\IBMCOM\PROTOCOL\TCPBEUI.OS2
DEVICE=3DC:\IBMLAN\NETPROG\RDRHELP.200
IFS=3DC:\IBMLAN\NETPROG\NETWKSTA.200 /I:C:\IBMLAN /N
DEVICE=3DC:\IBMCOM\PROTOCOL\NETBIOS.OS2
DEVICE=3DC:\IBMCOM\MACS\NULLNDIS.OS2
rem DEVICE=3DC:\IBMCOM\MACS\PMAC.OS2
rem DEVICE=3DC:\IBMCOM\MACS\EL90X.OS2
rem DEVICE=3DC:\IBMCOM\MACS\RTSND.OS2
RUN=3DC:\IBMLAN\NETPROG\LSDAEMON.EXE
RUN=3DC:\OS2\SYSTEM\LOGDAEM.EXE
RUN=3DC:\OS2\EPWROUT.EXE 1
DEVICE=3DC:\OS2\LOG.SYS
COUNTRY=3D034,C:\OS2\SYSTEM\COUNTRY.SYS
CODEPAGE=3D850,437
DEVINFO=3DKBD,SP,C:\OS2\KEYBOARD.DCP

rem *** Multimedia
SET MMBASE=3DC:\MMOS2;
SET DSPPATH=3DC:\MMOS2\DSP;
SET NCDEBUG=3D4000
RUN=3DC:\MMOS2\MIDIDMON.EXE
DEVICE=3DC:\MMOS2\SSMDD.SYS
DEVICE=3DC:\MMOS2\R0STUB.SYS
DEVICE=3DC:\MMOS2\MIDI.SYS
DEVICE=3DC:\MMOS2\VCSHDD.SYS
rem RUN=3DC:\MMOS2\QRYMMCD.EXE

PRIORITY_DISK_IO=3DNO
AUTOFAIL=3DYES
PAUSEONERROR=3DNO
REIPL=3DOFF
CLOCKSCALE=3D4
BUFFERS=3D90
IOPL=3DYES
MAXWAIT=3D3
MEMMAN=3DSWAP,PROTECT
SWAPPATH=3DD:\Temp\System 20480 131072
BREAK=3DOFF
THREADS=3D1024
PRINTMONBUFSIZE=3D134,134,134

rem *** Video
DEVINFO=3DSCR,VGA,C:\OS2\BOOT\VIOTBL.DCP
SET VIDEO_DEVICES=3DVIO_SVGA
SET VIO_SVGA=3DDEVICE(BVHVGA,BVHSVGA)
DEVICE=3DC:\OS2\MDOS\VSVGA.SYS
SET GRADD_CHAINS=3DC1
DEVICE=3DC:\OS2\GRADD.SYS
DEVICE=3DC:\OS2\MDOS\VMANWIN.SYS
SET VCFG_NO_DDC=3DTRUE
SET GREEXT=3DSDDGREXT
SET C1=3DSDDGRADD
DEVICE=3DC:\OS2\SDDHELP.SYS

rem *** Are we running just OS/2 apps?
PROTECTONLY=3DNO
rem --- DOS settings
SHELL=3DC:\OS2\MDOS\COMMAND.COM C:\OS2\MDOS
FCBS=3D16,8
RMSIZE=3D640
DEVICE=3DC:\OS2\MDOS\VEMM.SYS
DOS=3DLOW,NOUMB
FILES=3D40
rem --- Virtual devices
DEVICE=3DC:\OS2\MDOS\VXMS.SYS /UMB
DEVICE=3DC:\OS2\MDOS\VDPMI.SYS
DEVICE=3DC:\OS2\MDOS\VDPX.SYS
DEVICE=3DC:\OS2\MDOS\VWIN.SYS
DEVICE=3DC:\OS2\MDOS\VW32S.SYS
DEVICE=3DC:\OS2\MDOS\VAPM.SYS
rem DEVICE=3DC:\OS2\MDOS\VCDROM.SYS
DEVICE=3DD:\Util\System\DOS\VCDROM.SYS
DEVICE=3DC:\OS2\MDOS\VMOUSE.SYS
DEVICE=3DC:\OS2\MDOS\VCOM.SYS
rem --- TCP/IP support
DEVICE=3DC:\TCPIP\bin\vdostcp.sys
DEVICE=3DD:\Util\System\DOS\VCompat.SYS
PROTSHELL=3DC:\OS2\PMSHELL.EXE

rem *** System environment
rem --- WPS settings that shouldn't be here
SET RESTARTOBJECTS=3DSTARTUPFOLDERSONLY
SET KILLFEATUREENABLED=3DON
SET SCUSEPRETTYCLOCK=3DON
rem SET AUTOSTART=3DPROGRAMS,TASKLIST,FOLDERS,CONNECTIONS,WARPCENTER
SET AUTOSTART=3DPROGRAMS,TASKLIST,FOLDERS
SET DESKTOP=3DC:\Escritorio
rem --- real system settings
SET USER_INI=3DC:\OS2\OS2.INI
SET SYSTEM_INI=3DC:\OS2\OS2SYS.INI
SET OS2_SHELL=3DC:\OS2\CMD.EXE
SET RUNWORKPLACE=3DC:\OS2\PMSHELL.EXE
SET COMSPEC=3DC:\OS2\CMD.EXE
LIBPATH=3D.;C:\OS2\DLL;C:\IBMLAN\NETLIB;C:\MUGLIB\DLL;C:\IBMGSK50\LIB;C:\IB=
MGSK40\LIB;C:\IBMGSK\LIB;C:\MPTN\DLL;C:\TCPIP\DLL;C:\IBMCOM\DLL;C:\OS2\MDOS=
;C:\OS2\APPS\DLL;C:\MMOS2\DLL;C:\IBMINST;C:\JAVA11\DLL;C:\NETSCAPE\PROGRAM;=
C:\;D:\Util\System\dll;D:\Util\ODIN\SYSTEM32;D:\CDWFS
SET PATH=3DC:\OS2;C:\OS2\SYSTEM;C:\OS2\APPS;C:\IBMLAN\NETPROG;C:\MUGLIB;C:\=
IBMGSK50\BIN;C:\IBMGSK40\BIN;C:\IBMGSK\BIN;C:\MPTN\BIN;C:\TCPIP\BIN;C:\IBMC=
OM;C:\OS2\MDOS\WINOS2;C:\OS2\INSTALL;C:\;C:\OS2\MDOS;C:\JAVA11\BIN;C:\MMOS2=
;C:\NETSCAPE\PROGRAM;D:\Util\System\scripts;D:\Util\System\bin;D:\Util\ODIN=
\SYSTEM32;D:\CDWFS
SET DPATH=3DC:\;C:\IBMLAN\NETPROG;C:\IBMLAN;C:\MUGLIB;C:\MPTN;C:\IBMCOM;C:\=
OS2;C:\OS2\SYSTEM;C:\OS2\MDOS\WINOS2;C:\OS2\INSTALL;C:\OS2\BITMAP;C:\OS2\MD=
OS;C:\OS2\APPS;C:\MMOS2;C:\MMOS2\INSTALL;C:\IBMINST;D:\Util\System\data;
SET PROMPT=3D$i[$p]
SET HELP=3DC:\MPTN;C:\MPTN\HELP;C:\OS2\HELP;C:\MMOS2\HELP;C:\IBMLAN\NETPROG=
;C:\TCPIP\HELP;D:\Util\System\help;D:\CDWFS;
SET GLOSSARY=3DC:\OS2\HELP\GLOSS;
SET IPF_KEYS=3DSBCS
SET KEYS=3DON
SET BOOKSHELF=3DC:\IBMLAN\NETPROG;C:\OS2\BOOK;C:\MMOS2;C:\BOOKS;C:\TCPIP\HE=
LP;D:\Util\System\book;
SET SOMIR=3DC:\OS2\ETC\SOM.IR;C:\OS2\ETC\WPSH.IR;C:\OS2\ETC\WPDSERV.IR;C:\O=
S2\ETC\REXX.IR
SET SOMDDIR=3DC:\OS2\ETC\DSOM
rem --- General settings
SET LANG=3Des_ES_EURO
rem SET TZ=3Dcet-1ces
SET TZ=3DCET-1CDT,3,-1,0,7200,10,-1,0,10800,3600
SET ULSPATH=3DC:\LANGUAGE
SET DEVICEFONTDISABLED=3DNO
SET DISPLAYTYPE=3DVGA
rem SET DELDIR=3DC:\DELETE,512;D:\DELETE,512;
SET TMP=3DD:\Temp
SET TEMP=3DD:\Temp
rem --- Java
SET CLASSPATH=3D.\.;C:\IBMGSK\CLASSES\SRIP.JAR;C:\IBMGSK\CLASSES\SGUIDE.ZIP=
;C:\IBMGSK\CLASSES\CSSGKEY.JAR;C:\JAVA11\LIB\SecMa.jar;C:\java11\Swing\swin=
gall.jar;C:\java11\lib\classes.zip;C:\OS2\JAVAAPPS\LVMGUI.ZIP;C:\TCPIP\java=
;
SET SWING_HOME=3DC:\java11\Swing
rem --- ???
SET NLSPATH=3DC:\MPTN\MSG\NLS\%N;C:\TCPIP\msg\ESES850\%N;
SET ETC=3DC:\MPTN\ETC
SET IKEYMAN_HOME=3DC:\IBMGSK
SET IKEYMAN40_HOME=3DC:\IBMGSK40
SET IKEYMAN50_HOME=3DC:\IBMGSK50
rem --- LAN settings
SET NWDBPATH=3DC:\IBMLAN\NETPROG
SET DLSINI=3DC:\IBMLAN\NETPROG\NETGUI.INI
SET INIT_FILE_NAMES=3Dnetgui
SET INIT_FILE_RANGES=3D200
SET WPS_COMMUNICATION=3DYES
SET LANINSTEP=3DN:\CID\SERVER\ibmls
rem --- TCP/IP settings
SET TCPLANG=3Des_ES
SET HOSTNAME=3Dthinkpad
SET USE_HOSTS_FIRST=3D1

rem *** Application specific settings
SET EPMPATH=3DC:\OS2\APPS;

rem *** RSJ CD-Writer File System ***
rem BASEDEV=3DLOCKCDR.FLT /D
rem DEVICE=3DD:\CDWFS\RSJSCSI.SYS
rem IFS=3DD:\CDWFS\CDWFS.IFS
rem RUN=3DD:\CDWFS\CDWFSD.EXE -p "D:/Temp" -c600000 -b2048 -t2 -i3 -smax

rem *** ASPI router 1.1b9
rem DEVICE=3DD:\Util\System\boot\aspirout.sys

rem *** VirtualPC/2
DEVICE=3DC:\IBMCOM\MACS\SWITCH.OS2
rem DEVICE=3DD:\VirtualPC\vpcapp.sys

BaseDev=3DCADH.SYS
DEVICE=3DD:\Util\System\BOOT\VFDISK.SYS 0


[Non-text portions of this message have been removed]



=20
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 Your email settings:
    Individual Email | Traditional

 To change settings online go to:
    http://groups.yahoo.com/group/os2hardware/join
    (Yahoo! ID required)

 To change settings via email:
    mailto:os2hardware-digest{at}yahoogroups.com=20
    mailto:os2hardware-fullfeatured{at}yahoogroups.com

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
=20

---