On Fri, 09 Mar 2007 11:55:24 -0500, Andre Nancoz wrote:

>Got an 80 wire and redid tests. Without/with report small size jumper, various
>BIOS settings for the IDE including custom HD (LBA, mode 3). Nothing works the
>BIOS always reports "none" after scanning  the primary
channel master IDE (also
>tried secondary IDE channel).

Are you sure that the ATA controller channels are enabled? You first
post says they're not!

Ciao,
  Dani




------------------------ Yahoo! Groups Sponsor --------------------~--> 
Yahoo! Groups gets a make over. See the new email design.
http://us.click.yahoo.com/hOt0.A/lOaOAA/yQLSAA/9rHolB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 Your email settings:
    Individual Email | Traditional

 To change settings online go to:
    http://groups.yahoo.com/group/os2hardware/join
    (Yahoo! ID required)

 To change settings via email:
    mailto:os2hardware-digest{at}yahoogroups.com 
    mailto:os2hardware-fullfeatured{at}yahoogroups.com

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

---