Andre Nancoz wrote:
> The BIOS has 4 lines for primary master slave, secondary master slave. Each
> line has a list with  the options of "none, auto, user type HDD,
other ATAPI,
> CD-ROM, , MO, LS-120, ZIP-100". On "auto" the BIOS says
scanning for device, up
> till now this always results in the result of "none" being
displayed. If I
> select "user HDD" I can then get a screen of options where I
can choose
> translation mode, PIO mode, Ultra-DMA mode, etc. When trying with
"user type
> HDD LBA mode the BIOS does not issue the scanning message and the
display of peripherals list the
> primary master as "none".
Hi,,  Andre!

My apology. I had no idea this thread would last this long, so I have
been deleting the discussion once I had read the posts, and I've
forgotten what board you have.  Could you possibly point me to an online
copy of your motherboard manual?   It should be fairly simple to come up
with a solution once we know what ALL of the options you have are.  What
you listed above is not what you need!

Regards,

Steve



------------------------ Yahoo! Groups Sponsor --------------------~--> 
See what's inside the new Yahoo! Groups email.
http://us.click.yahoo.com/0It09A/bOaOAA/yQLSAA/9rHolB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 Your email settings:
    Individual Email | Traditional

 To change settings online go to:
    http://groups.yahoo.com/group/os2hardware/join
    (Yahoo! ID required)

 To change settings via email:
    mailto:os2hardware-digest{at}yahoogroups.com 
    mailto:os2hardware-fullfeatured{at}yahoogroups.com

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

---