Can you also paste-post the contents of protocol.ini from c:\ibmcom please
?

Cheers/2

Ed.

Jim Byrnes wrote:

> I am still trying to get my Linksys WiFi card recognized in ecs1.1 on a
> IBM T22. The following are the pcmcia lines from my config.sys:
>
> BASEDEV=PCMCIA.SYS /P
> BASEDEV=IBM2SS14.SYS
> BASEDEV=AUTODRV2.SYS
> DEVICE=C:\OS2\MDOS\VPCMCIA.SYS
> DEVICE=C:\OS2\BOOT\PCMSSDIF.SYS
> DEVICE=C:\IBMCOM\MACS\IBMWIFI2.OS2
>
> I have added the card in the Adapters and Protocols window and have
> these lines in config.sys is there anything else I should be doing?
>
> Regards, Jim
>
>
> Yahoo! Groups Links
>
>
>
>



------------------------ Yahoo! Groups Sponsor ---------------------~-->
Buy Ink Cartridges or Refill Kits for your HP, Epson, Canon or Lexmark
Printer at MyInks.com. Free s/h on orders $50 or more to the US & Canada.
http://www.c1tracking.com/l.asp?cid=5511
http://us.click.yahoo.com/mOAaAA/3exGAA/qnsNAA/9rHolB/TM
---------------------------------------------------------------------~->

 
Yahoo! Groups Links

 To visit your group on the web, go to:
     http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
     os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/
 


---