TIP: Click on subject to list as thread! ANSI
echo: os2hardware-l
to: All
from: Jim Byrnes
date: 2004-02-23 14:06:38
subject: Re: PCMCIA?

Ed Durrant wrote:
> Can you also paste-post the contents of protocol.ini from c:\ibmcom please
> ?
> 
> Cheers/2
> 
> Ed.

Sure.

[PROT_MAN]

    DRIVERNAME = PROTMAN$

[IBMLXCFG]

    netbeui_nif = netbeui.nif
    tcpip_nif = tcpip.nif
    E100BEO2_nif = E100BEO2.NIF
    IBMWIFI2_nif = IBMWIFI2.nif

[NETBIOS]

    DriverName = netbios$
    ADAPTER0 = netbeui$,0
    ADAPTER1 = netbeui$,1

[netbeui_nif]

    DriverName = netbeui$
    Bindings = E100BEO2_nif,IBMWIFI2_nif
    ETHERAND_TYPE = "I"
    USEADDRREV = "YES"
    OS2TRACEMASK = 0x0
    SESSIONS = 130
    NCBS = 225
    NAMES = 21
    SELECTORS = 50
    USEMAXDATAGRAM = "NO"
    ADAPTRATE = 1000
    WINDOWERRORS = 0
    MAXDATARCV = 4168
    TI = 30000
    T1 = 1000
    T2 = 200
    MAXIN = 1
    MAXOUT = 1
    NETBIOSTIMEOUT = 500
    NETBIOSRETRIES = 3
    NAMECACHE = 1000
    RNDOPTION = 1
    PIGGYBACKACKS = 1
    DATAGRAMPACKETS = 50
    PACKETS = 300
    LOOPPACKETS = 8
    PIPELINE = 5
    MAXTRANSMITS = 6
    MINTRANSMITS = 2
    DLCRETRIES = 10
    FCPRIORITY = 5
    NETFLAGS = 0x0

[tcpip_nif]

    DriverName = TCPIP$
    Bindings = E100BEO2_nif,IBMWIFI2_nif

[E100BEO2_nif]

    DriverName = E100B$
    SPEED = 0
    FORCEDUPLEX = 0
    TRANSMITBUFFERS = 20
    RECEIVEBUFFERS = 20

[IBMWIFI2_nif]

    DriverName = IBMWFL$
    DESIRED_SSID = "JIMSHOMENET"
    CREATE_IBSS = "NO"
    MW_ROBUSTNESS = "NO"
    PSP_MODE = "DISABLED"
    WEP_ENABLED = "YES"
    AUTH_TYPE = "SHARED_KEY"
    TX_KEY = 1
    KEY_1 = "not_real_key"
    USE_POLLING = "yes"




> Jim Byrnes wrote:
> 
> 
>>I am still trying to get my Linksys WiFi card recognized in ecs1.1 on a
>>IBM T22. The following are the pcmcia lines from my config.sys:
>>
>>BASEDEV=PCMCIA.SYS /P
>>BASEDEV=IBM2SS14.SYS
>>BASEDEV=AUTODRV2.SYS
>>DEVICE=C:\OS2\MDOS\VPCMCIA.SYS
>>DEVICE=C:\OS2\BOOT\PCMSSDIF.SYS
>>DEVICE=C:\IBMCOM\MACS\IBMWIFI2.OS2
>>
>>I have added the card in the Adapters and Protocols window and have
>>these lines in config.sys is there anything else I should be doing?
>>
>>Regards, Jim
>>
>>
>>Yahoo! Groups Links
>>
>>
>>
>>
> 
> 
> 
> 
> 
>  
> Yahoo! Groups Links
> 
> 
> 
>  
> 
> 
> 



------------------------ Yahoo! Groups Sponsor ---------------------~-->
Buy Ink Cartridges or Refill Kits for your HP, Epson, Canon or Lexmark
Printer at MyInks.com. Free s/h on orders $50 or more to the US & Canada.
http://www.c1tracking.com/l.asp?cid=5511
http://us.click.yahoo.com/mOAaAA/3exGAA/qnsNAA/9rHolB/TM
---------------------------------------------------------------------~->

 
Yahoo! Groups Links

 To visit your group on the web, go to:
     http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
     os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/
 


---
* Origin: Waldo's Place USA Internet Gateway (1:3634/1000)
SEEN-BY: 633/267 270
@PATH: 3634/1000 12 106/2000 633/267

SOURCE: echomail via fidonet.ozzmosis.com

Email questions or comments to sysop@ipingthereforeiam.com
All parts of this website painstakingly hand-crafted in the U.S.A.!
IPTIA BBS/MUD/Terminal/Game Server List, © 2025 IPTIA Consulting™.