> I forgot to add.. we replaced the fuel pump also.. forgot to add that
> to my list.  Have looked down the throat observing fuel spray, etc. The
> fuel input is fine.. and is not flooding out.  Also thought of vapor
> lock but adding heat shields makes no difference.
> 
> We'll keep puttering along!! Thanks for replying!
Hi Ed,
  Just for fun have you monitored voltage to the coil?  If the fuel delivery
is fine, that just leaves ignition... Either a voltage dropping out, or a
poor wire connection/semi-broken wire rattling around.
Hook up a voltmeter at your coils 12volt terminal and watch that while the
engines running and see what it does when the engine dies.
 | AmiQWK 2.7 - S/N 0261 |
... What goes around usually gets dizzy and falls over.
--- OLMS 2.60p.a1+ [EPMAP55A]
---------------