Hello all,

After having suffered for over a week I have finally eCS1.1 installed in 
the way I want it.

I'd replaced the original 40 Giga disk by a blank  80 Giga one,  so the 
1024 cylinders issue was not a problem, and with XWP and other bells and 
whistles not installed I/you/we can have a stable system.

Remaining problems are:

- The nic of which  I don't care for now-
- The soundcard.

Sound drivers for the in build (of course) card are in the file  
ad1819os2_317.zip avaible at Hobbes.
However, albeit they are supposed to do so, these drivers are giving  
sound in WinOS2 (the installer can't install them apparently). And sound 
in OS2 itself has a rather poor quality.

So I tried the Uniaud drivers. These are giving an excellent sound in 
OS/2 (and Innotek's VPC).  Then, for Winos2, I've tried to use the dta  
drivers:

genaud-v3.1r02.zip

and the newer one:

27-12-03 16:45        110.131      0 a---  dta.zip

Alas. When installed both drivers are initiated and activated, but 
before the WPS has to come up I've a hang at PMshell ....
Is anyone aware of a way out?

-- 
Groeten uit Gent,

   Kris



 
Yahoo! Groups Links

 To visit your group on the web, go to:
     http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
     os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/
 


---