MM> Very good illustration!  I, too, am annoyed by this re-sequencing of
MM> stuff, over and over again, just to do a multiple-print.  (Have you,
MM> however, tried sending the output to the Hard Drive, instead of the
MM> printer?  At least, then, all the ESC sequences would be in order,
MM> although it would be one heck of a big file.)
MM> But, in general, I don't waste my laserprinter on multiple copies.
MM> That's what a print shop is for.  :)
     Further, I have noticed that when you send
multiple copies of a fax, the re-sequencing is NOT
done.
     I have tried a few times to print to the HD, but
I've never had satisfactory results.  That was with a
dot matrix - I haven't tried it with my DeskJet.
     Print shop.  I sometimes think that's what I am
running.  Every month I send 30 to 40 notices of
meetings for 3 different groups.  Usually post cards.
If I took them to a print shop it would mean putting on
some clothes, driving 15 miles to the print shop, 15
miles back.  Too much trouble.  Actually, the post
cards usually fit in my printer buffer, so once started
I can go on to other things while the printing takes
place.  I just mailed a little over 500 post cards
printed that way - sure, a print shop might have
helped, but I still had to run them thru the printer
for addressing.
     Print Shop R I!
  FIDO: Bill White @ 1:135/110 (Miami)
 InterNet: bill.white@110.sunshine.com
 * SLMR 2.1a * A closed mouth gathers no feet!
--- Maximus 2.01wb
---------------