| TIP: Click on subject to list as thread! | ANSI |
| echo: | |
|---|---|
| to: | |
| from: | |
| date: | |
| subject: | Compost |
WI>Ok, I gotta know, Christopher, do librarians compost at the same rate or
WI>higher rate than users of "Word" (or whatever it was that you said :)
It is clammed that Shelf-ish compost at about the same rate as Macro-pods
Christopher.Greaves@CapCanada.Com www.interlog.com/~cgreaves
* 1st 2.00b #6263 * Less torque, More traction!
--- PCBoard (R) v15.3 (OS/2) 5
---------------
** A related thread FOLLOWS this message.
FIDO MESSAGE AREA==> TOPIC: 208 HOME & GARDEN Ref: F1KD3280 Date: 01/16/98
From: TIMOTHY DUEHRING Time: 09:54am
\/To: CHRISTOPHER GREAVES (Read 2 times)
Subj: R: Compost
Christopher,
CG>TD> Peanut shells aren't very fast either.
CG>(Ponders) Why would this be? Peanuts are legumes, aren't they?
CG>Are they the nitrogenous-fixing kind? I've always thought of
CG>peanut shells as being bits of carbonaceous fibre. Nothing to it,
CG>really. Maybe they are an extremely high-form of cellulose?
I don't know. All that I can say is that after 3 years in one
of my compost piles everything was broken down except for the peanut
shells and some bigger root chuncks.
Timothy Duehring
tduehrin@execpc.com
FIDO=1:154/280
___
* UniQWK #5098* Exxon - greasing the coastline for smoother boating!
---------------
>>>>>>>>>>>>>>>>>>>>>> LAST Message In Thread <<<<<<<<<<<<<<<<<<<<<<
FIDO MESSAGE AREA==> TOPIC: 208 HOME & GARDEN Ref: F1K00008 Date: 01/15/98
From: CHRISTOPHER GREAVES Time: 04:50pm
\/To: BARBARA HAZEN (Read 2 times)
Subj: tree candles
BH>I would really like any recipes. I have tried making scented candles in
BH>looking for something to do with them. Remember when thinking, I can't
BH>see what or where I'm going with the hot wax.
Take care with these. As long as you feel comfortable dealing
with melted wax, this method ha sthe added safety feature of
employing vast amounts of cold water. Worst that can happen is
that you get gobs and gobs of solidified wax. let it cool and
harden before pulling the plug:
OK. "Christmas" Tree Candles. Part 1.
This will make trees like Fir Trees, with triangular vanes in a
vertical plane.
You'll need:
1) A small supply of brown candle wax, typically the smudgy mess
that you get when you melt down all the leftovers from a
zillion candles.
2) A larger supply of green candle wax. I accumulate batches of
different shades throughout the year and clarify them (q.v.)
so that I always have a stock of disks on hand.
3) A ten-inch plain white parrafin candle. Two, if you want to
make two trees.
Procedure:
4) Fill the kitchen sink almost to the brim with cold water.
5) Melt the brown wax, coat the candle with brown wax. This makes
the tree trunk.
6) Seal both wick ends of the candle with wax. This is important.
We're about to bring the candle to the water, and a drop of
water can migrate into the heart of the wick and cause
sputtering part way through a hot date later on (g!).
7) Melt one batch of green wax. (When we've run out of this
shade, or got bored, we'll switch to another shade).
8) With one hand hold the candle horizontally and lower it gently
to the surface of the water. It will float. The lower half is
wet, the upper half is dry.
9) Gently pour a little green wax over the candle, less at the
"top" end, more at the base. The wax will spread out on the
surface of the water, making a triangular plane away from the
trunk on both sides.
10) Allow the thin sheet of wax to cool solid, then lift the
candle from the water. You have two triangular fins,
narrow at the top of the candle (where you will light it),
broad at the base.
11) When the trunk is dry, repeat the float-and-pour process,
with the candle shaft rotated through 15 degrees. This will
generate ONE triangular fin adjacent to one of the previous
fins.
12) Continue the dry-float-rotate-pour sequence until you have a
series of triangular fins radiating from the trunk.
13) Dry it, you'll light it!
OK. "Christmas" Tree Candles. Part 2.
This will make trees like I-don't-know-what, with circular vanes
in a horizontal plane.
You'll need:
1) A small supply of brown candle wax, typically the smudgy mess
that you get when you melt down all the leftovers from a
zillion candles.
2) A larger supply of green candle wax. I accumulate batches of
different shades throughout the year and clarify them (q.v.)
so that I always have a stock of disks on hand.
3) A ten-inch plain white parrafin candle. Two, if you want to
make two trees.
Procedure:
4) Run about half an inch of cold water in the kitchen sink.
5) Melt the brown wax, coat the candle with brown wax. This makes
the tree trunk.
6) Seal both wick ends of the candle with wax. This is
important. We're about to bring the candle to the water, and
a drop of water can migrate into the heart of the wick and
cause sputtering part way through a hot date later on (g!).
7) Melt one batch of green wax. (When we've run out of this
shade, or got bored, we'll switch to another shade).
8) With one hand hold the candle verically and lower it gently to
the bottom of the sink, holding the candle by the top end. It
will rest on the sink floor. The lower half-inch is in water.
9) Gently pour a little green wax down the candle. The wax will
run down the trunk and spread out on the surface of the
water, making a circular plane away from the trunk in all
directions.
10) Allow the thin sheet of wax to cool solid, then start the
cold-water tap running splashlessly (!) down the inside wall
of the sink. The water begins to rise in a relentless manner.
11) Repeat the pour process with a slightly smaller amount of
wax when the water has risen about a centimetre. This will
generate a slightly smaller circular plane a centimetre above
the previous plane.
12) Continue the pour-and-wait sequence until you have a series
of circular planes radiating from the trunk.
13) Dry it, you'll light it!
Note: These Planar candles make a beautiful sight when they are
burning down. The green planes make a holey shield for the
parrafin candlle burning inside. The candle flame shines
through the thin sheets of green wax in their various shades.
Christopher.Greaves@CapCanada.Com www.interlog.com/~cgreaves
* 1st 2.00b #6263 * Don't Brake!
--- PCBoard (R) v15.3 (OS/2) 5
---------------
* Origin: FidoNet: CAP/CANADA Support BBS : 416 287-0234 (1:250/710)* Origin: FidoNet: CAP/CANADA Support BBS : 416 287-0234 (1:250/710) |
|
| SOURCE: echomail via exec-pc | |
Email questions or comments to sysop@ipingthereforeiam.com
All parts of this website painstakingly hand-crafted in the U.S.A.!
IPTIA BBS/MUD/Terminal/Game Server List, © 2025 IPTIA Consulting™.