Felix Miata wrote:
 
>
>http://www.giga-byte.com/MotherBoard/Products/Products_Spec_GA-8IPE1000%20Pro.htm
 
> However, with SCSI card installed but no SCSI devices attached, the
> BIOS goes nuts. It won't see the IDE HD. Instead, if there is no
> bootable floppy, and even though the IDE HD is the first choice in
> that menu, I get "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS
> RETURN". Simply by attaching a SCSI HD, whether or not it has any
> partitions or formatting, it boots the HD selected in the BIOS.

Flashing from the supplied 18 Nov BIOS to the 25 Dec BIOS fixed this.
-- 
"I place economy among the first and most important of republican
virtues, and public debt as the greatest of the dangers to be feared."
                                        President Thomas Jefferson

 Team OS/2 ** Reg. Linux User #211409

Felix Miata  ***  http://members.ij.net/mrmazda/



 
Yahoo! Groups Links

 To visit your group on the web, go to:
     http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
     os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/
 


---