--- Tom Lee Mullins  wrote:
> I have eCS 1.1 on my computer. I use the dialer from
> ATTGlobalNetwork ( http://www.attglobal.net ). It 
> detected the modem and inserted the settings (actually
> it was 'generic Apple' settings but it was for 56k
> and it worked with Warp ver 4). When I try to connect
> to the isp, the dialer indicates the modem is not
> responding. Is it a modem problem or a problem with the
> dialer or eCS? eCS came with an eCS licenced version of
> SIO. I installed a registered version of SIO and it 
> crashed/kepted from booting my computer (I am hoping to
> edit it out of config.sys so it shows the other SIO 
> that came with eCS).
> 
> BigWarpGuy

I've had no luck with the SIO drivers on two desktops and a thinkpad.
The com.sys driver with ECS1.1 is terribly flawed in my opinion too,
unless there is some command line tweak to get it to go, I could never
get more than 600 bytes/sec. with it. I am using the com.sys from my
warp 4 dated 1998 to get about 4.5 kbytes/sec. on dialup.

I now have my desk computer as a gateway internet connection for my
home client network which works great. Only now on my wife's computer,
if the network is down (I am away and my computer is off) and she uses
the dialler (either ibm or injoy) there is a long pause before it will
access her local modem. Makes the modem look dead, it is not.
Apparently the client software locks out the modem until it times out.

Franklin

__________________________________
Do you Yahoo!?
Yahoo! Tax Center - File online by April 15th
http://taxes.yahoo.com/filing.html


------------------------ Yahoo! Groups Sponsor ---------------------~-->
Buy Ink Cartridges or Refill Kits for your HP, Epson, Canon or Lexmark
Printer at MyInks.com.  Free s/h on orders $50 or more to the US & Canada.
http://www.c1tracking.com/l.asp?cid=5511
http://us.click.yahoo.com/mOAaAA/3exGAA/qnsNAA/9rHolB/TM
---------------------------------------------------------------------~->

 
Yahoo! Groups Links

 To visit your group on the web, go to:
     http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
     os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/
 


---