Hi Larry,

Will certainly try your methodology, which is the most constructive so far.

Thanks a bunch.

Larry Tawa wrote:

>In , on 03/19/2004 
>   at 04:42 PM, Kevin Johnson  said:
>
>  
>
>>There is absolutely no way under any combination of conditions could I 
>>get Ecsv1.1 to load
>>on this MB. 
>>    
>>
>snip
>
>Regarding the ASUS A7N8X 2.0 motherboard, I have installed eCS 1.1 on the
>deluxe and subsequently the non-deluxe version via the advanced install. 
>Note no SCSI nor SATA.  Using DVD-ROM/CDR-RW with both motherboards.  No
>audio installed.  From my notes:
>
>(1) eCS 1.1 base install fails (at least for me with DANI drivers -
>performance or compatability mode); eCS 1.1 base install *succeeds* with
>IBM drivers (performance mode) - I did not test IBM drivers in
>compatability mode.
>
>After installation, I then manually REMed the appropriate IBM drivers and
>installed daniatapi.flt from daniatapi0314.zip and danis506.add from
>danis506r167.add and the box reboots and appears to be stable; no switches
>yet. 
>
>(2) SIO 2.00 - the known traps/lockups; during the eCS 1.1 install, I
>would install IBM's com.sys rather than SIO 2.00.  After the eCS 1.1
>install, I tried SIO 2.03 Professional on the ASUS A7N8X 2.0 Deluxe with
>occasional lockups of the system; also install.cmd of SIO 2.03
>Professional fails so I had to manually install.  After installing SIO
>2.03 Professional, various traps will occur unless I REM out the
>"device=x:\sio2k\vsio2k.sys ...." in config.sys.
>
>Bottom line - I am just using IBM's com.sys.
>
>(3) allow the eCS 1.1 install to manage the USB selections.
>
>HTH
>
>Larry using eCS 1.1 on ASUS A7N8X deluxe 2.0 motherboard
>  
>

---
[This E-mail scanned for viruses by Declude Virus]



------------------------ Yahoo! Groups Sponsor ---------------------~-->
Buy Ink Cartridges or Refill Kits for your HP, Epson, Canon or Lexmark
Printer at MyInks.com. Free s/h on orders $50 or more to the US & Canada.
http://www.c1tracking.com/l.asp?cid=5511
http://us.click.yahoo.com/mOAaAA/3exGAA/qnsNAA/9rHolB/TM
---------------------------------------------------------------------~->

 
Yahoo! Groups Links

 To visit your group on the web, go to:
     http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
     os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/
 


---