Hi Frank,

Monday January 24 2005, Frank Reid writes to Kevin Klement:

 > That client is TCP/IP.  You'll configure the network
 > parameters in PROTOCOL.INI and SYSTEM.INI (where your IP
 > address, gateway, workgroup and other important
 > configuration details are contained).  Once configured, you
 > will use the "NET" command to manage the network, e.g.

 > NET USE Z: \\SERVER\SHARE

 > Which would map the Z: drive to a shared directory "SHARE"
 > on the system "SERVER".

 > I think MS still does support a NETBEUI client (MSLANMAN),
 > but I don't recall that the operation of it is any different
 > than above.

WOW!

This really helped, I got even closer to getting it working, Now at least it's
loading the TCP/IP Protocol and logging me onto the network, but still
problems, I'm getting a error message on the server I'm trying to log on too,
at least I getting closer. :)

It's got something to do with my IP address, the server says it's a IP
confliction on the network. DARN!


Say, Frank, I'll be away for a day or two, PLEASE KEEP IN TOUCH, when I get
back friday I write you back with my error messages. 

Thanks in advance

                                                   Kevin
                                                   klement{at}shaw.ca

--- Squish/386 v1.11