In , on 05/19/04 
   at 04:31 PM, XE22  said:

>If you double click on the printer in question in the spooler properties
>box and go into the printer properties,  set the output port to USB.

Yes, I've done that. 


> If it does not see the printer check your cable.
>I had to buy another one, as the first one was a real El Cheapo and did
>not work. I suppose some work only with Windows if at all.  There is a
>little circuit board inside the connector to convert the signal.

OK, I'll try to return the cable.

Thanks for your help.

-- 
-----------------------------------------------------------
"Mark Abramowitz"
-----------------------------------------------------------



 
Yahoo! Groups Links

 To visit your group on the web, go to:
     http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
     os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/
 


---