* In a message originally to All, Bill Mussen said:
 > My M-7000 commo terminal started experiencing problems about
 > six weeks
 > ago: after being turned or for a couple of minutes, the audio
 > input
 > level lights begin to act erratically, and within moments,
 > all pannel
 > lights go off except for the left-most audio input level
 > light that
 > stays on very dimly. Also at this point, the unit stops
 > processing.
 > The same thing happens regardless of signal mode or strength,
 > and on
 > both the A and B audio inputs.  I wrote to the manufacturer,
 > Digital
 > Electronic Systems in Fla inquiring about servicing, but that
 > was over
 > a month ago and they haven't replied.  Also wrote to
 > Universal, which
 > markets the unit -- no reply either, but that was only about
 > 10 days
 > ago, so they may still come through. If they don't, does
 > anyone have
 > any ideas where I might get this unit repaired? Thanks for
 > any
 > suggestions,  Bill
It sounds like the power supply or at least part of the power
supply has gone bad.  If you have ANY ELECTRONIC experience, try
checking the power supply voltages and see if there are any bad fuses.
If you don't have any experience with electronic's, I would think that
an Electronic repair shop should be able to take care of you.
Especially if it's just the power supply.
                           Doug
---
---------------