Ed Durrant wrote:
> 
> Ray Davison wrote:
> 
>>I had a CD RW and a DVD reader and all was well.  I swapped the  CD RW
>>for a DVD\CD RW.  Now boot hangs at DANIDASD.DMD.  DOS and W98SE don't
>>seem to have a problem loading and reading the drive.
>>
>>Ideas?
>>
>>Ray
>>
> Check yopu don't have the new drive set to CS (Cable Select), always set
> the drive to master or slave (as appropriate). If this is the only device
> in the EIDE channel, set it to Master.

It is set to slave and there is a master.

Your suggestion implies that this setting is only needed for OS/2, 
since DOS and Win work OK.  Was that your intent?

Ray



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Make a clean sweep of pop-up ads. Yahoo! Companion Toolbar.
Now with Pop-Up Blocker. Get it for free!
http://us.click.yahoo.com/L5YrjA/eSIIAA/yQLSAA/9rHolB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

 To visit your group on the web, go to:
     http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
     os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/
 


---